Department of Commerce, Community, and Economic Development
Alaska Oil and Gas Conservation
Commission
HOME
EVENTS
DATA
Data List
Drilling
Production
Orders
Data Miner
Document Search
REPORTS
Reports and Charts
Pool Statistics
FORMS
LINKS
Links
Test Notification
Data Requests
Regulations
Industry Guidance Bulletins
How to Apply
ABOUT US
History
Staff
HELP
Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
179-090
• STATE OF ALASKA • ALASKA OIL AND GAS CONSERVATION COMMISSION WELL COMPLETION OR RECOMPLETION REPORT AND LOG 1 a.Well Status: Oil ❑ Gas❑ SPLUG ❑ Other ❑ Abandoned J Suspended LI 1 b.Well Class: 20AAC 25.105 20AAC 25.110 Development r I Exploratory Ed GINJ ❑ WINJ ❑ WAG[] WDSPL❑ No.of Completions: Service ❑ Stratigraphic Test ❑ 2.Operator Name: 6. Date Comp.,Susp.,or 14. Permit to Drill Number/ Sundry: M-W Drilling, Inc.(Contractor) Aband.: 8/29/2015 179-090 / 31 5.39 6 tnA 3.Address: 7. Date Spudded: 15.API Number: PO Box 110389 Anchorage AK 99511 1982 50-031-20003-00-00 4a. Location of Well(Governmental Section): 8. Date TD Reached: 16.Well Name and Number: Surface: 1982 PS-3 Top of Productive Interval: 155' 9. KB(ft above MSL): 17. Field/Pool(s): GL(ft above MSL): Pilgrim Hot Springs Total Depth: 260'(open to 223') 10. Plug Back Depth MD/TVD: 18. Property Designation: GR Fee-Uaatuq, LLC 4b. Location of Well(State Base Plane Coordinates, NAD 27): 11.Total Depth MD/TVD: 19. Land Use Permit: Surface: x- N65 05.398' y- W154 55.735' Zone- 260' TPI: x- Si- Zone- 12. SSSV Depth MD/TVD: 20.Thickness of Permafrost MD/TVD: Total Depth: x- y- Zone- 5. Directional or Inclination Survey: Yes ❑(attached) No ❑I 13.Water Depth, if Offshore: 21. Re-drill/Lateral Top Window MD/TVD: Submit electronic and printed information per 20 AAC 25.050 (ft MSL) 22. Logs Obtained: List all logs run and,pursuant to AS 31.05.030 and 20 AAC 25.071,submit all electronic data and printed logs within 90 days of completion,suspension,or abandonment,whichever occurs first.Types of logs to be listed include,but are not limited to: mud log,spontaneous potential, gamma ray,caliper, resistivity,porosity,magnetic resonance,dipmeter,formation tester,temperature, cement evaluation, casing collar locator,jewelry,and perforation record. Acronyms may be used.Attach a separate page if necessary RECEIV small JAN 2 2?Oi6 Nov 0 3 2015 AO '` '° 23. CASING, LINER AND CEMENTING RECORD WT. PER SETTING DEPTH MD SETTING DEPTH TVD AMOUNT HOLE SIZE CEMENTING RECORD CASING FT. GRADE TOP BOTTOM TOP BOTTOM PULLED 6 5/8" 17.56 ASTMB 0 161.5 3" 7.58 ASTMB 155 260 24.Open to production or injection? Yes ❑ No ❑ 25.TUBING RECORD If Yes, list each interval open(MD/TVD of Top and Bottom; Perforation SIZE DEPTH SET(MD) PACKER SET(MD/TVD) Size and Number): See sketch. No details available on perforations. 26.ACID, FRACTURE,CEMENT SQUEEZE, ETC. Was hydraulic fracturing used during completion? Yes -] No 7. Per 20 AAC 25.283(i)(2)attach electronic and printed information DEPTH INTERVAL(MD) AMOUNT AND KIND OF MATERIAL USED 27. PRODUCTION TEST Date First Production: Method of Operation(Flowing,gas lift,etc.): Date of Test: Hours Tested: Production for Oil-Bbl: Gas-MCF: Water-Bbl: Choke Size: Gas-Oil Ratio: Test Period -p Flow Tubing Casing Press: Calculated Oil-Bbl: Gas-MCF: Water-Bbl: Oil Gravity-API(corr): Press. 24-Hour Rate ...p Form 10-407 Revi ed /ZZ015 1i 14 CONTINUED ON PAGE 2 RBD* `, , y „ Submit ORIGINIAL only, ?NI t/is ce �� OV O 1015ki 28. CORE DATA Conventional•(s): Yes E No 11 Sidewall CoreSYes [ No Ell If Yes, list formations and intervals cored(MD/TVD, From/To),and summarize lithology and presence of oil,gas or water(submit separate pages with this form, if needed). Submit detailed descriptions, core chips,photographs, and all subsequent laboratory analytical results per 20 AAC 25.071. 29. GEOLOGIC MARKERS (List all formations and markers encountered): 30. FORMATION TESTS NAME MD TVD Well tested? Yes 0 No Permafrost-Top If yes, list intervals and formations tested,briefly summarizing test results. Permafrost-Base Attach separate pages to this form, if needed, and submit detailed test information, including reports, per 20 AAC 25.071. Formation at total depth: 31. List of Attachments: 1. Estimated well sketch 3. P&A Summary 2. Pictures 4.Slurry Mix Information to be attached includes, but is not limited to:summary of daily operations,wellbore schematic,directional or inclination survey,core analysis, paleontological report,production or well test results,per 20 AAC 25.070. 32. I hereby certify that the foregoing is true and correct to the best of my knowledge. Contact: MW Drilling, Inc. Email: inc.com Printed Name: Wa ne Westber. //� //r Title: President Signature: 9'�'' �' /r '�!"// Phone: 907-345-4000 Date: /0//1/5 INSTRUCTIONS General: This form and the required attachments provide a complete and concise record for each well drilled in Alaska. Submit a well schematic diagram with each 10-407 well completion report and 10-404 well sundry report when the downhole well design is changed.All laboratory analytical reports regarding samples or tests from a well must be submitted to the AOGCC, no matter when the analyses are conducted. Item 1 a: Multiple completion is defined as a well producing from more than one pool with production from each pool completely segregated. Each segregated pool is a completion. Item 1 b: Well Class-Service wells:Gas Injection,Water Injection,Water-Alternating-Gas Injection,Salt Water Disposal,Water Supply for Injection, Observation,or Other. Item 4b: TPI(Top of Producing Interval). Item 9: The Kelly Bushing and Ground Level elevations in feet above mean sea level. Use same as reference for depth measurements given in other spaces on this form and in any attachments. Item 15: The API number reported to AOGCC must be 14 digits(ex:50-029-20123-00-00). Item 20: Report measured depth and true vertical thickness of permafrost. Provide MD and TVD for the top and base of permafrost in Box 29. Item 22: Review the reporting requirements of 20 AAC 25.071 and, pursuant to AS 31.05.030,submit all electronic data and printed logs within 90 days of completion,suspension,or abandonment,whichever occurs first. Item 23: Attached supplemental records should show the details of any multiple stage cementing and the location of the cementing tool. Item 24: If this well is completed for separate production from more than one interval(multiple completion),so state in item 1, and in item 23 show the producing intervals for only the interval reported in item 26. (Submit a separate form for each additional interval to be separately produced, showing the data pertinent to such interval). Item 27: Method of Operation: Flowing,Gas Lift, Rod Pump, Hydraulic Pump,Submersible,Water Injection,Gas Injection,Shut-in, or Other(explain). Item 28: Provide a listing of intervals cored and the corresponding formations,and a brief description in this box. Pursuant to 20 AAC 25.071,submit detailed descriptions,core chips,photographs,and all subsequent laboratory analytical results, including, but not limited to:porosity, permeability,fluid saturation,fluid composition,fluid fluorescence,vitrinite reflectance,geochemical,or paleontology. Item 30: Provide a listing of intervals tested and the corresponding formation,and a brief summary in this box. Submit detailed test and analytical laboratory information required by 20 AAC 25.071. Item 31: Pursuant to 20 AAC 25.070,attach to this form:well schematic diagram,summary of daily well operations,directional or inclination survey,and other tests as required including,but not limited to:core analysis,paleontological report, production or well test results. Form 10-407 Revised 5/2015 Submit ORIGINAL Only • • PS-3 2 inch aide ports r 10dnch blind flank with 2-Inch valvar �+ �- :....:P"-",.......181 -.0-10-Inch muter gate valve G.L. a v.....,1., ., .,>. 4 Weil cutoff at ground level because of cement collar A.!oil"! t < f a oh ' .. a`` _ Cement 8 cf pumped ...,. 17 ftft ,.,'. f' ." 1h `a 16inon Wing in 20nnch t,; ester hole _.,.30' Gmer+t `-. & _ , 4_ Top of mud&sand it/�f• h 4 t -5eh 1St /, ! a 10-inch casing In 14-%Inth hole 3 i .nit.— Bairn,acme In 9-71g inen ho1e .._.i50' ' e ----- Top of cement-32 cf pumped 187.5 ft �i 1 1 1 1 1 X 5-Inds oortsanolc reducer I I 1 1 welded on 34nc*f pipe overlap 12 ft I I I _.223' I I c7----Tagged Bottom I1 (i I ...co -inch slotted using Tote!length 105 tt II 1 1I 1!' T.O.drilled 200 ft 1 t 1 OrlHMd 1982 I »» v Pro}ett No. Pilgrim Spring CASING PROFILE OF WELL PS-3 FQure Woodra.faaiods cs itmear , 6 6 -;-"F--;;-',",„.;,,,;. • x °e. r =�" r .. A t I t } 7 r ' i d.l '.1,-•.,4���� , � 4L`* ,t '^ mr- 't Fay`" r f C / 1 • x' t x "r r rV r iq`.1 " ' F ! S d • -! .t e ,, ' 4,f y } '".,,sa" { o,[+�e , 6 i1 r ' 4 ,� I ' " • - ' ' Ix .:a '' F -' :' ,1'4i } �t4 'sP lyx � 4{ 1 3 kY + Sy N 4 1 �'� „< far t o- } • s+r < 1i,v , ';/,,, ',-4 i ".„'.,".1 . 111}V,wi 1 't 5 Y `,• +u. °'k.' �.1'yl,lAw✓" , :''''..,1, A '` s r;� ,'N," ,, [ e rr, pi''ti ' 19 1 Ij i:'"“' rr, k \,t.. y Ir. ') r f 4 ) a.'v 14;IW�+ i t +r ","'"',i1 „r �t• k*w, A s• ^ .'e *I';' 3,,i i ,'`.+' �`` '1,' ,\ h t:; f e i' 'IT_ „t,1 m il'.C1. �' i4 4 :� _ r. .;2,i.,,V,1/1 l R�it /4 sk,rir :C A.:"1 :`,iC,ii"i".•''-1a1,41, A.-, '1°1' f +t:, A, utn y€fi *"' ' yam@ } y ,� -i''' i •.� � ``t Cq,\kR k lS� , lyttiV11 W3F,��4• r. 1 Y Er '',,.T4,,,,,'--i. ''4 j1 .P-'• ', \s .N.; b ,• j 4f 1 #,, I;t Jr{,,}:-..V.,rX x,,$� �: , 1 x .,",, " k ii 6 \ 4 k; � � ,'i ,..ti / �ry F •,...'1,',','''.,*'' ' 'i '"T 1'0..!( ' w "�, ', wtt • ,;. r:�ero v -, ' "+ ti1,\., G ; r' Ifl 9t r ' 1t � ./��''�"y'1yr�'t ra , ! , ` '� � � \ ,t �r r-��• t rh`d 'y ,l,� i,P 3':>a•• '` `g� �a'�, • t!, .vf" y q��tt' Et )y�il 1 }`,.,,£}Asks f .�i,•,,,,'1r $;,A r' :J a.1""i'"3.;.-09/-,c,' {r,," : 4� ,.. '"a .l''.6-&;'•' :.�� ;'• '-,74,-..fel ... i�1 ` ,; �1 .a gltsir'h \i1��!�.;r 7r,tio-,°h;y. t'tYi�[v .,, '9)P* *::: , r . .ry ii,,,,c '3��`<f�c .'1 l`'"\�.n � 1'� 3 1J '3T 2 Yt t-"`y x, ��.: _ +l I I �W ., ` P� ii�Ci ,..i.,;,* �l� 1 -',,,,4,-,04,4;;',.-,,,, Y IigttA t S N4 ^ ' 1 f-- - '--,---1.,, '''..,-. 2,:.:*-'''' '..h h�' `/X--++' �1,4y£+ iy,_ i. 4,-, 14,4 ii 7 � Li',,y' .' t .v`. 3 : 77- 1 I' wr ✓4 I r r P� 5}di� 8 �$7 Ir di r ,..,;:i„,,,:1t r 9W • tj g d '��`�` I ,r 1 dJ . . .y� I�, , t __i . �,.- t :}` 1\ { ,V, ,� '''S Kir i 4 h{0 i'• '� \ft),,' }. 1 °4r i 1 1,r,,,,P;, p ''''''.1.1i,• \•—_-_5/.1 .-;y1 w��. 1\111 yY�IY x l'...,1.`,. , arts r `1✓;tR�7• '' `� • 1 1,,\-;:�,1''- :1' /1.5.,.', /,"'›t '.' j4}�d' t',3)4 '31',11,1,,, 't '. ,4 '1, :.s �,ri / ,, .. i 1 .,,� `:. ,}i .,' J, , ',Oil t 1\t4: F - fr s F i, i '/,,rli� ', 4 a2,0,-; '' -__4 r l \. sal f 1l-r :=1.,,; �.'r�rep l4' ,'.',ti 'r '';'''1,C,,'� } '' 'l. r #rb i I �$,"� ._2..-11/1/..),j',k .l F +fie c 1 �' o r,r 1'c• r 1 1 4 ',( -,"t Iv ry-P .wr1S 9 ,'�•,,,•,,, , a r •' i8 z`, .\ r , , i \, I 1'\ ..,...< "�1 x,,1``,1 0....,.."P•'t'1 p.. ,t '/„"a M r-`'xj i a", F ;. '4' f I:- .; a t 1 1. �'' i vim ,'+..11p1P i`j?� � y;`'; lr ,T.''''?':f s- ''-'7" { e : ,' I _,,-,,---,,,,,,-',/‘, # , ' :`-h 1 te` i ;. - t /, t „ 1 ` 1+ , 'Al.:,-; i� ms / ; 1 k \ ' ty r n� ,, � ig ti , C ) Vi , \,,, 1 I� L, /r/ (:- ¢fin,' .1,. 3:41$1, i,,, 1r ' .. W , "wr %4. ,{r r"t :' } ,ur � If\-'� //( i` yy�i �� � /�`1 'r � 1y� • Ids� "_, i J , ' , . � _ 1 ,; r . s,i 1. i}Eti r' 31:x4-� Y^ \ �-;` v , ,.!..:(.,,t,---ii.,-<2' `, ,I?yk' i - ,1 i Jy '.�t� J}}�,, ""'y*'r '; ,,'1'1,' \ \t, ,..\-,,r, i� 4; t 4.}f ll 1; ,it k� �r''Y` �,'' R r R , 1 `P �,�'7 l--i �\ t 1 V'. 1 ti .f).t:' ,,,. i ; `st * !-v y� a 1, �� s �,. y�' j \ ,k— ,) >b f' 1 - \ ,. .,„14,k,...,,,%.,... „ ,. .,..1„ ,,,,,..„.�' t d'. : 1, ,z,. ....,.. ‘, .... ` ..”� ti; . f �\ r i ,,,h.�,"„ �' ",; 1 ',ril a,,LL tat � .- r YY a, - '-'.".":_,k1\ �,s1/11/r-,.,111 r ��. .\ ,,,-,.;..„,„,-2,,1,,,,.__id � 4 yet e t II. ',..4.'',: , .4'. I `jr 1 F j , t 1i 1,r l C 1 !F r 1 ./,,! • ,, , 1, .\'" ''1f.t y ',,ti f S'. i;is -- ' ',-711-„:t//,',. q�f S. t '''' p''')''' 1 '` ,�1 I �, -/y4, i ii +A 11 w C`. '9.' ,. , ,, . „ 1 J 4 t h 1 , I i1 to s t'n ///l' /d4, 1 it 14f l rla 1: r �I , r g ,r S ''''.1f.",-; ." y. c • ,.) ^ • • R �{+. ." , a • _ro ; '�:' • • at a . ...1, r Irr tl Y Oe Y 1 ( z Via. ,:_ er';t.:&1), ` • iii. " ' .. . A >3� 0.- o. t p 1 y S Attv a :.: ' �" r .mss ''.:. -' '.I' 4r*' ,... Ilkil •4/ ../ / ,,..., `. kms. -+r F $ • A 0J• m` • i , 4 O ty, !& • { 4 • • M-W Drilling, Inc. Work Summary- Pilgrim Hot Springs P5-3 1. Run 1.5" tremie and tag fill at 223' 2. Pull tremie back to 220'and pumped 16 cf of cement 3. Pulled tremie to 150' and pumped 16 cf of cement 4. Filled well with sand and mud to 30' 5. Pumped 8 cf of cement to bottom of valve at ground level 6. Let cement set - four days 7. Cutoff valve and weld ID plate on at ground level because there was concrete sheath/collar around it 8. Backfill with local sand ♦ P.O. Box 110389 ♦ Anchorage, AK 99511 • ♦ Phone: 907-345-4000 ♦ Fax: 907-345-3287 • ♦ mw@mwdrillinginc.corn ♦www.mwdrillinginc.com • 's are our business!!! • S 4 M-W Drilling, Inc. API Class A cement slurry components: - Class A Cement, 1 sack 0.48 CF - Sand, Fine 1.00 CF - Water (9 gals) 1.20 CF - Bentonite,fine grained (4 lbs) Total slurry yield for each cement sack 2.68 CF One grout mix batch equals 3 volumes of above slurry mix ♦ P.O. Box 110389 ♦Anchorage, AK 99511 • ♦ Phone: 907-345-4000 ♦ Fax: 907-345-3287 • ♦ mw@mwdrillinginc.com ♦www.mwdrillinginc.com • 's are our business!!! • • TIME DRILL LOG CASING _ g M-W Drilling, Inc. 7 4,,,,/ l- �� %af lf �� _ ) / , ' =. /� 'per `` , ? ' •� � i eft DATE ' j / `.J I `�, CREW dt1/4;K iii541/1// 't 4AY'Xi (-0.5- .,,. f� PROJ.NO. / r/� ; • " /f� NAME �� / ! ,,e/?', I /6 i21 - j :6 �i% ADDRESS /c:- i4yc, y * fi `/1. - ( �/f/#/ CITY PHONE C/ ��t' v � ✓�,�/���' f ����‘ JOB LOCATIO1J���✓ /�",r '�"�"�' A -- i2i /11 ; EQUIP.# ' 7 " `'/ / ' END 1 4/ " ' / I ■II;[,//I START , / TOTAL // i",, n J6-jf _ OURS - ‘X /i �"� r Static Level GPM Yield f�i 1 / � �/ .4 . Bags of Bentonite ii Avi- i�v ✓' /�'kit�-A'Affl .Ll 01; t 4e/4) 7 V h'd//'� f. f 114/14 1" DEPTH WELL LOG �f ✓ ,Q Ifie 0- CASING STICK UP /Vii' .%/V: '2a 0 Gff 1 .,.a 0....._....,..R.,,.,,..o.,-,,.., nlRlwLCf ncnnrnr_uiravn,r. • • . , - _ TIME DRILL LOG 1 CASING 62 OPAry - ' m 41 M-W Drilling, )Inc. ) -i, ‘,/, /kW , .... . ..1 #) 411,. . ..fik ..fici-,fii; , cc : = DATE OA 1 #1141: /,i‘' it:t7 • / iij . -'w,' ? . 66 e 1/,,, -,/fil,,) ADDRESS PROJ.NO. tn'1/47/G. .3;(441flithl/i/ %ii tili CITY PHONE 9Mxtv/i al -.4--cry&ii: JOB LOCATION ....-7 iAl:/) //i.:- /////71 i 44;/?? EQUIP.# i 1/414:: /V C 0.! END .2774-9.Pf .41//,. A'414," 3 START if147 ;X 42/4//:(Viiir TOTAL HOURS Static Level GPM Yield /y .iihip',..47 591CK eiii /d, . .1, , i i_,, Bags of Bentonite e1/4,i z::- / - ogfy -7:7 /,51.o ,,.f7-/--' DEPTH WELL LOG 0- CASING STICK UP • • TIMECASING p DRILL LOG idrr ./y /1/4q) .'1145,-- -- M-W Drilling, Inc. Oj A /71/ f/fAig ,,..4itiesP , . 'rF.,, p„" <173r 0-,.:11;/./`P DATE :$1,; 0 srr����rr r� ,�a��� L/ f f /�, / Ftp✓ j �� ,i J CREW elbla " M,1 /0/V) v �' �- (r<�/ fj .� 6/. ,�j 'ff�� �1 PROJ.NO. ' f �,��vf t,G /" NAM //0��f///r�l n/ r /ls/, w7 �) til A-Z• �J �. PADDRESS fief°�1 &// 4 , ��"���G fa,I '�, 99 7L'f/42 1/ CITY / r ;4/67 PH E ✓ .,,,f:1/04 f f JOB LOCATION / Y I!��� / V71/ /4,72/1./ ::IP# f ! 1 J J b itif J•'• START ' Tr t,, %� f 1 >76t/j/ir;e7 ToTAL HOURS J /14(i all,G �f le i fatir Static Level GPM Yield Bags of Bentonite /1WP://5//46:0; c:C'4: i ✓fes r/'t % ' , /J I. — Cii ` ,//017 ' :41;(1/ 3-, f/0;7 . p«I : 1(/ ' — - DEPTH WELL LOG 0- CASING STICK UP The Punter Inc 19071 2sil-c7m ,-......_——--——---. • • TIME 1 ; DRILL LOG CASING CD s�°� `� , �r �`a-' M-W Drilling, Inc. 07/ 1 h r.: 11/10.X,',frg j/ i----1,-,-2,0,; i" DATE Yi/4*,p.-- 102112ffiti ' // ' 'I ' '/ - C R E W Ifni/ey/(24; //?F‘ PROD.N . NAME /17:://if INXIMETIMEM ;—:"T �,� ` ADDRESS iirR�II 6 CITY /d4�; PHONE 1I�� '//, P - JOB LOCATION j� 5 11-7/37/(271 I' ' a _ EQUIP.# i , AI/ �/ , /1 END .f .)a' r START HOURS Static Level GPM Yield r Bags of Bentonite /.rt : / DEPTH WELL LOG ® ____ CASING STICK UP ...........s'- --- • • TIME DRILL LOG } CASING . . g��o �?� ! , ��i�L 'A f1 s M-' Drilling, Inc. /'. �� DATE a 44191]:� rG , i CREW /1` ,d ✓%F:% ' ) j;/0/1;t1/'F= - G�TGJr :! p J / PROJ.NO. ,� 1,1t6"Cy�r "�.7 , (, /Nat) NAME !'�/hf 4 idtgil,- ;€11:-i 4v ADDRESS /67M _ 1/- '/til f A?? f4 ./ �J'I"'�"- CITY /�/ PHONE • J 4;fi a/ aj JOB LOCATION /��Ll i.i. �it ��,%J hlk ` ftc vlt��L A7(7 4147 EQUIP.# j 4'i.W r 0 ;`r 747";7 END AV' 1ffi 210 3,c- START f,�r►�1 Alikf2 jW Ho S yr w Static Level GPM Yield /2(/I%ifi9/'F �ry rl `7 Bags of Bentonite DEPTH WELL LOG 0- CASING STICK UP lar% G-rte 3 `' OP -la c 0 • • TIME DRILL LOG CASING C7 cp M-W Drilling, Inc. 0 (I-14/ (i ; ,Af5Py :I-V. CC DATEyrf/✓ �� ,/ ovi-x pity- c. i CREW _..4f VL/7 G / �0 [`� PR ,rt ' 7g/If tf NAME Oa q 4.5 fff 111 r "r 1/ " + ADDRESS 0i/4 ) 1 r!/, r CITY PHONE -;/' l4 4 JOB LOCATION /1/. 4(115 EQUIP.# END START TOTAL HOURS Static Level GPM Yield Bags of Bentonite j DEPTH WELL LOG 0- CASING STICK UP • • TIME DRILL LOG CASING - s M-W Drilling, Inc. 69T1,11; f DATE ! ` ��I�1 44:411/t/i5;CREW 4 r": r4/4!2y%5 r PROJ.NO. NA irAk--4 /1t20 h14L t < d/ f ADDRESS /� • L!M i / CITY PHONE '914V.) t/• JOB LOCATION/' //f/ EOUIP# END START TOTAL HOURS Static Level GPM Yield Bags of Bentonite DEPTH WELL LOG 0- CASING STICK UP r • • \ V-___.-- ri ,� xP E U ca flnu 7 V) 7 N V1 V) 2 H Q. W 00 at co rn Q al r�1 O co o�0 0 0M O N O I- 0 I- 0 FWD W "d N N 00 00 00 00 ei ei a-1 a-1 Q J 01 01 01 01 01 01 0 0 0 0 0 OC r-1 a-1 r-1 1-1 e-f a-I N N N 0 Cn WCC 0C 0C CC CC C L Y Y Y Y Y Y Y Y Y O C ei ei e-I ri ri r1 -1 -I a-4C C C�'6 m M M M M M M M MCO CC v oc CC CL CC CC CC CC CL CC >. = J V) V) N V) V) V)•Zr V1 Ln cn Ln in V) N 1 N H F- I- H H F— H H F— H C O _ W LJJ l0 M M M l/) (11' lD l0 • lDv- ice: V• M O O O O O M m m m O C ca N O - C"..1O1 a1 a1 O1 .v7 C1/41 Z 3 3 3 3 > c 2 * * *` * * * o 0 0 o p L L L L L L CL a a a 2 0 O O O O 0 0 �,, › a) V a a a a a a L L L L CC 0 CL 06 06 06 o2S 06 o2S C - C C O W LU LU LU Z J a 0 OA OD 00 0O CLD 00 L L L > OC a1 a1 a1 a) a1 a) ' w O LU LU LU LU LU LU L • L L U a1 Cl) Cl) H v- 4- 4- 4- 4- v- C . C E N Q 0 0 0 0 0 0 O CC C O W C C C C C C U U U C Cl.. 0 0 0 0 0 0 CEI • CC CO O v) v v) v) Vf H Y Y Y OU ,> •> •> •> •> •> (j) v) of W 0 0 0 0 0 E co • CO 03 73 Q ' Q Q C Q Q < '` 1 Q f0 0 0 0 . 0 0 a - a a a1 V) V) V) V) V) D D D L a) C 00 O V1 4.0 N 01 l0 N E Z •• E n N n N O 0 � : � != N N 0 r-I ri ei O N N 0. 0 0 ei e-i e-1 ri 4 I- a .-1 ri ; r-1 i-1 N N N N 0 y.+ C ei M ' u1 a1 W S, v v'f S) E C 00 • OO 0A 00 `- c a c c 6Q O CO Z o. • Q o Q CL a1 V) V) V) V) OA Q W C C C of N M ei I N OA •• OD OD OA rco ei ri r-1 0 a a a a • a a a * • • • Colombie J (DOA) From: Alan P. Baldivieso <ABaldivieso@aidea.org> Sent: Monday,June 15, 2015 1:57 PM To: Bettis, Patricia K (DOA) Cc: Guhl, Meredith D (DOA); Colombie,Jody J (DOA) Subject: RE: Pilgrim Springs 1-5 and Mary's Igloo 1 Hi Patricia, During our earlier conversations, Guy had indicated that the applications for sundry approvals should be submitted by the contractor selected to perform the work. I just spoke with the contractor—MW Drilling—who indicated that he intends to submit the applications later this week. I understand that Wayne Westberg from MW Drilling has been in touch with Guy to clarify expectations for the applications. Best, Alan Baldivieso Program Manager Alaska Energy Authority (907)771-3027 From: Bettis, Patricia K(DOA) [mailto:patricia.bettis@alaska.govj Sent: Monday,June 15, 2015 1:38 PM To:Alan P. Baldivieso Cc:Guhi, Meredith D (DOA); Colombie,Jody J (DOA) Subject: Pilgrim Springs 1-5 and Mary's Igloo 1 Good afternoon Alan, The AOGCC has not received any sundry applications for the plugging and abandonment of the Pilgrim Springs 1-5 and Mary's Igloo 1 wells. Does AEA plan to submit those application in the near future? Thank you, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage,AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE:This e-mail message,including any attachments,contains information from the Alaska Oil and Gas Conservation Commission(AOGCC),State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information.The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it,without first saving or forwarding it,and,so that the AOGCC is aware of the mistake in sending it to you,contact Patricia Bettis at(907)793-1238 or patricia.bettis@alaska.gov. 1 • • irm/47A#.4 \\ALASKA I ant ENERGY AUTHORITY March 9, 2015 Commissioner Cathy Foerster Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Re: Pilgrim Hot Springs Geothermal Wells Docket No: OTH-14-019 Dear Commissioner Foerster: The Alaska Oil and Gas Conservation Commission (AOGCC)has requested that the Alaska Department of Commerce, Community, and Economic Development (DCCED) submit a plan to suspend or plug and abandon six geothermal wells: Pilgrim Springs 1 - 5 and Mary's Igloo 1. The Alaska Energy Authority(AEA) is working on behalf of DCCED to develop a plan for these wells in compliance with 20 AAC 25.105 and 20 AAC 25.112. Alan Baldivieso, AEA geothermal program manager,has consulted with Patricia Bettis and Guy Schwartz at AOGCC to gather information and outline the steps required to plug and abandon all six wells. Alan has also contacted representatives of local landowners to confirm this is the preferred outcome. Based on these conversations and recommendations from AOGCC staff, AEA proposes to solicit bids through AEA's procurement process and select a contractor to perform the work; submit applications for sundry approval for the six wells to AOGCC;plug the wells according to the accepted plan with work estimated to be completed by September 30, 2015. I understand AOGCC staff has voiced support with the proposed course of action. Please let me know if you require additional information. Si rely, Sa a isher-Goad Executive Director cc: Fred Parady, DCCED Acting Commissioner akenergyauthcrity.crg 813 West Northern Ughts Boulevard Anchorage,Alaska 99503 T 907 771 3000 Toll Free(Alaska Only)888.300 8534 F 907.771.3044 .. sem,.. ..,..... � .,. „, ' 1 '' _. :-�..... . � OF Tk ._... .��_ __.�..w..., ... ,._. .. �.. � �,.a,��. __ ... -� —.... I%% �� THE STATE Alaska Gil and Gas — - of Conservation Commission : _� 333 West Seventh Avenue w y GOVERNOR BILL WALKER Anchorage, Alaska 99501-3572 ®FLAA Main: 907.279.1433 Fax 907.276.7542 January 7, 2015 www•aogcc.alaska.gov CERTIFIED MAIL— RETURN RECEIPT REQUESTED 7012 3050 0001 4812 6839 Fred Parady Acting Commissioner Alaska Department of Commerce, Community, and Economic Development P.O. Box 110800 Juneau, AK 99811-0800 Re: Pilgrim Springs Geothermal Wells-Request for Extension Docket No: OTH-14-019 Dear Mr. Parady: The Alaska Oil and Gas Conservation Commission (AOGCC) received the Alaska Department of Commerce, Community, and Economic Development's (DCCED) request for an extension to the December 15, 2014 deadline for submittal of an acceptable plan and schedule for either the plugging and abandoning in compliance with 20 AAC 25.105 and 20 AAC 25.112 or suspension under 20 AAC 25.110 for the Pilgrim Springs-1 through 5 and the Mary's Igloo-1 geothermal wells. The AOGCC hereby GRANTS an extension until March 10, 2015 for the submittal of an acceptable plan and schedule for either the plugging and abandoning or suspension of the Pilgrim Springs 1 through 5 and the Mary's Igloo 1 geothermal wells. If the AOGCC does not receive an acceptable plan and schedule for the fore-mentioned wells, the AOGCC will notice a public hearing to determine whether remedial action is necessary with regard to the wells and which entity will bear responsibility for compliance. Please call Ms. Patricia Bextis at (907) 793-1238 if you have questions concerning this matter. Sincerely,4Cat y P/Fo, ,,,,,/,__ erster Chair, Commissioner l, S. Postal ServiceTM • CERTIFIED MAILTM RECEIPT m (Domestic Mail Only;No Insurance Coverage Provided) For delivery Information visit our website at www.usps.com® N ri Postage $ Certified Fee Return Receipt Fee Postmark O (Endorsement Required) Here Restricted Delivery Fee I= (Endorsement Required) IM Total Postage&Fees m Fred Parady fU Sent To Acting Commissioner Alaska Department of Commerce, t7 Street,Apt.No.; N or PO Box No. Community,and Economic Development City,State,ZIP+4 Post Office Box 110800 '-• Juneau,AK.99811-0800 P • m :I! _ • SENDER: COMPLETE THIS SECTION COMPLETE THIS SECTION ON DELIVERY • Complete items 1,2,and 3.Also complete A. Signature item 4 if Restricted Delivery is desired. ❑Agent ® Print your name and address on the reverse ❑Addressee so that we can return the card to you. B. Received by(Printed Name) C. Date of Delivery le Attach this card to the back of the mailpiece, or on the front if space permits. D. Is delivery,eddrede Gifferspttfrom item 1? 0 Yes 1. Article Addressed to: If YES,enter ,delivery address below: 0 No STATE OF ALASKA Fred Parady Trvica� Acting Commissioner 3. Service Type Alaska Department of Commerce, 0 Certified Mail® 0 Priority Mail Express'" Community,and Economic Development ®Registered 0 Return Receipt for Merchandise Post Office Box 110800 0 Insured Mail 0 Collect on Delivery Juneau,AK 99811-0800 4. Restricted Delivery?(Extra Fee) 0 Yes 2. Article Number 7 012 3050 0001 4 812 6839 (Transfer from service label) PS Form 3811,July 2013 Domestic Return Receipt • • * VOFTHE �w��\11/�-mss, THE ST 'I'E e artmc nt of Commerce, Community, �� ;,\-spa .-9 ofA,`�\'{] ` /ems andcolonic Development `. tsirt: ______.____ OFFICE OF THE COMMISSIONER C" GOVERNOR BILL WALKER 3-. r i' ). P.O.Box i�oaoo *ti to - OA, P Juneau,Alaska 99811-0800 ALAS Main:907.465.2500 DEC 15 2014 _ Programs fax:907.465.5442 AOGCO December 8, 2014 Ms. Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West Seventh Avenue Anchorage,AK 99501 Dear Ms. Bettis: As you know from our conversation last week, DCCED has been working diligently to respond to your letter of September 12th regarding the Pilgrim Springs Geothermal Wells issue,Docket No: OTH-14-019. We have gathered substantial historical information and believe a proposed plan for the wells with the current project proponents is the solution although it remains unclear as to the specifics of DCCED's current responsibility and best path forward. Any action regarding the wells for which DCCED is listed as the operator appears to require coordination with the land owners Unataaq and Mary's Igloo Native Corporation. Regardless,pending completion of this research and sorting out these responsibilities,we would like to request a 60 day extension. We understand that ACEP has been or will be in contact with you regarding the four wells for which ACEP is the operator of record. Please feel free to contact me at any time regarding this matter. Sincerely, ...,, ---------r) J Fred Parady Acting Commissioner cc: Sara Fisher-Goad, Executive Director,Alaska Energy Authority Sean Skaling, Program Development and Project Evaluation Director,Alaska Energy Authority pF T��(.(--, �����7,.sv THE STATE Alaska Oil and Gas ���, of Conservation Commission - _ __ - ALASI�:A `•ttittt 333 West Seventh Avenue 1' GOVERNOR BILL WALKER Anchorage, Alaska 99501-3572 OF Ph P Main: 907.279.1433 ALA9'- Fax: 907.276.7542 E® n,, Sall HU� q � 1 2.O\i www.aogcc.alaska.gov Wayne E. Westberg President ©"� °M-W Drilling, Inc. (ADCCED) 1 P.O. Box 110389 Anchorage, AK 99511 Re: Pilgrim Hot Springs Field, Undefined Geothermal Pool, PS-3 Sundry Number: 315-396 Dear Mr. Westberg: Enclosed is the approved application for sundry approval relating to the above referenced well. Please note the conditions of approval set out in the enclosed form. As provided in AS 31.05.080, within 20 days after written notice of this decision, or such further time as the AOGCC grants for good cause shown, a person affected by it may file with the AOGCC an application for reconsideration. A request for reconsideration is considered timely if it is received by 4:30 PM on the 23rd day following the date of this letter, or the next working day if the 23rd day falls on a holiday or weekend. Sincerely, Cathy P. oerster Chair DATED this 3isf day of July, 2015 Encl. • • • RECEIVE! STATE OF ALASKA JUN 2 , ; ALASKA OIL AND GAS CONSERVATION COMMISSION i; APPLICATION FOR SUNDRY APPROVALS toms -71 )t J/S 20 AAC 25.280 a 1.Type of Request: Abandon❑ Plug Perforations;Li Fracture Stimulate ❑ Pull Tubing ❑ Operations shutdown❑ Suspend[ , Perforate LI Other Stimulate ❑ Alter Casing ❑ Change Approved Program L] Plug for Redrill Li Perforate New Pool ❑ Repair Well ❑ Re-enter Susp Well ❑ Other: ❑ 2.Operator Name CO IK4..,Zf 1_2,:/u4t,L l / 4.Current Well Class: 5.Permit to Drill Number: M-W Drilling,Inc. r 4-( r1 Exploratory ❑✓ Development ❑ ' ly- 070 la) 3.Address: Stratigraphic ❑ Service ❑ 6.API Number:�t 2 T"' PO Box 110389,Anchorage AK 99511 50-ON— x0003-co-O� 7.If perforating: 8.Well Name and Number: What Regulation or Conservation Order governs well spacing in this pool? AA- PS-3 AOGC 179-090 Will planned perforations require a spacing exception? Li Yes No 9.Property Designation(Lease Number): 11 14) 10.Field/Pool(s): 007 `- i.- U n ,> L Pilgrim Hot Springs U6 CP n ' 6- 141-41,-,A r 11. PRESENT WELL CONDITION SUMMARY Total Depth MD(ft): Total Depth TVD(ft): Effective Depth MD(ft): Effective Depth TVD(ft): Plugs(measured): Junk(measured): Ar 260 223 223 Casing Length Size MD TVD Burst Collapse Structural Conductor Surface Intermediate Production 167 6 5/8" /6;7 r Liner 105 3" •Z 4,0 ' Perforation Depth MD(ft): Perforation Depth TVD(ft): Tubing Size: Tubing Grade: Tubing MD(ft): /- 5-,z�L,' 260 to 155 2" Packers and SSSV Type: Packers and SSSV MD(ft)and TVD(ft): 12.Attachments: Description Summary of Proposal [J] 13.Well Class a er proposed work: Detailed Operations Program ❑ BOP Sketch ❑ Exploratory [ Stratigraphic❑ Development❑ Service I 14.Estimated Date for 1-Aug-15 15.Well Status after proposed work: Commencing Operations: OIL ❑ WINJ ❑ WDSPL ❑ Suspended ......1 16.Verbal Approval: Date: GAS Ci WAG ❑ GSTOR ❑ SPLUG I Commission Representative: GINJ ❑ Op Shutdown ❑ Abandoned I 17.I hereby certify that the foregoing is true and correct to the best of my knowledge. Contact Email mw@mwdrillinginc.com Printed Name ane E.Westberg President 6/21/2015 Signature ,w� //////� Phone 907-345-4000 Date ��` COMMISSION USE ONLY r Conditions of approval: Notify Commission so tha a representative may witness Sundry Number: 315• m0tC Plug Integrity i BOP Test ❑ Mechanical Integrity Test ❑ Location Clearance ❑ Other: ,( 7)/i-ah 0 c`c...r rv... --- ea s i"1 c„...)--- G u l Dj2 pi ..,_+_,..._X- 14W pt P<<t.co�f i.o., cJp rb1 f Ztt 44c- ac. it L L e) Spacing Exception Required? Yes ❑ No [,J' Subsequent Form Required: )d.Y 07 APPROVED BY / Approved by: e.„4.7 ,0 44.,,,,L...____ COMMISSIONER THE COMMISSION Date: 7_ 3( -'/- `��3c/Zi/`. ?. 3 c'-lS- 1 �� RBDMSJ AUG - 2 2015 0RIG INAL Submit Form and Form 10-403 Revised 5/2015 Approved application is valid for 12 months from the date of approval. Attachments in Duplicate M-W Drilling, Inc. RECEIVED June 22, 2015 JUN 2 2 2015 To: Commissioner, Alaska Oil & Gas Conservation Commission RE: Pilgrim Hot Springs Geothermal Wells/AEA Construction Contract 15-121 Subject: Notice of Intent to Plug&Abandon 6 Geothermal Exploration Wells Dear Sir: This is to notify the commission per 11AAC87.160 our intention to plug the following geothermal wells at Pilgrim Hot Springs: PS-1 AOGC 179-078 PS-2 AOGC 179-085 PS-3 AOGC 179-090,, PS-4 AOGC 100-274 PS-5 AOGC 100-275 MI-5 AOGC 100-276 Enclosed are our applications for sundry approvals. Thaou, 7/ ;(,� 6 • e E. Westberg, M C President M-W Drilling, Inc. • P.O. Box 110389 ♦Anchorage, AK 99511 • • Phone: 907-345-4000 ♦ Fax: 907-345-3287 • • mw@mwdrillinginc.com • www.mwdrillinginc.com • 's are our business!!! Attachment to Application for Sundry Approvals Description Summary of Proposal PS-3 AOGC 179-090 - Cement from bottom up to 105' - Mud and sand to 20' - Cement to surface - Cutoff well head and cap with welded X" plate on casing • • , . 2-inch side ports with 2-inch valves „..---___! _._._. ---.10-inch blind flange ,. -c:3---10-inch master gate valve , . — — — G.L. e'..5 .... , :fiili'• ,'i; ,.:•••••;;',,'2.,: i — 17 ftft ( - 7 8 `) ••Sfi:. i.. .4. . ..°1!. • ... ,,6.•. ,...:.1,- ..•1'.!.1°"; * -:%' .%.•;: , .: '''0`... ..--•..„ 16-inch casing in 20-inch el f!.!. ;i• auger hole Cement •„4... v. • c° , i ri f• i e-i '• .! ::0;' . ii,.. •'I ......... 58 ft : ..... 10-inch casing in 14-%inch .... hole ..<..-- 6-inch casing in 9-7/8 inch hole 167.5 ft . I HI ss..).,,,, . I I 1 3-X 5-inch concentric reducer &it I I I welded on 3-inch pipe overlap 12 ft Ill Ill p---3-inch slotted casing 1 I 1 Total length 105 ft III 1 I 1 ; . _T.D.drilled 260 ft 1 I 1 Za......., .• •:.! 1" i-- 1 Alig /Q Project No. Pilgrim Springs -? 15267A CASING PROFILE OF WELL PS-3 Figure 6 Woodward-Clyde Consultants / Nine ea) 470 2,33 Schwartz, Guy L (DOA) From: mw@mwdrillinginc.com Sent Wednesday,July 29,2015 5:18 PM To: Schwartz, Guy L(DOA) Subject: AOGC Well No. 179-090(ada PS-3): Plug and Abandonment Plan Description 1. Remove 10" blind flange and open 10"gate valve 2. Run 1.24"tremie pipe to 230'or as far as it will go 3. Cement from bottom up to 105 feet using the Class A cement slurry described in the attachment 4. Backfill with bentonite mud and sand to-23 feet 5. Cement from-23 feet to-3 feet. £ w �(fQ 6. Cut off the wellhead and casing at-3 feet from surface. P T1J 7. Weld a 0.250"steel plate on the casing with the AOGC well number on it. 8. Note: this well was open to 233 feet when logged in 2013. 9. .Sc 12•H.Lt LJ M 5i-el-a' if A Wayne E. Westberg, MGWC President CL M-W Drilling, Inc. pjw �D� ,,, ; 1) c4 s� ew+-O(76 907-345-4000 w�1 ,P F'l Cell:440-2536 6) S,I-t C/ectra ' 15fi e �J�S x G„ !D r5 K , 0 3s- 4( 136/- 7 AA, 7AAo P► 2° ' x .035 B04- : . 7 Mit— / 7-gc.), I 1 Schwartz, Guy L (DOA) From: mw@mwdrillinginc.com Sent: Thursday,July 30, 2015 8:33 AM To: Schwartz, Guy L(DOA) Subject: Attachment to Pilgrim P&A Plan Descriptions API Class A cement slurry components: --Class A Cement, 1 sack 0.48 CF --Sand, fine 1.00 CF --Water(9 gals) 1.2 CF --Bentonite,fine grained (4 lbs) Total slurry yield for each cement sack 2.68 CF Wayne E. Westberg, MGWC President M-W Drilling, Inc. 907-345-4000 Cell:440-2536 ir A 1_4\rJ4\<A OEM ENERGY AUTHORITY March 9, 2015 I�1i / — (10 Commissioner Cathy Foerster Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Re: Pilgrim Hot Springs Geothermal Wells Docket No: OTH-14-019 Dear Commissioner Foerster: The Alaska Oil and Gas Conservation Commission (AOGCC)has requested that the Alaska Department of Commerce, Community. and Economic Development(DCCED) submit a plan to suspend or plug and abandon six geothermal wells: Pilgrim Springs 1 - 5 and Mary's Igloo 1. The Alaska Energy Authority (AEA) is working on behalf of DCCED to develop a plan for these wells in compliance with 20 AAC 25.105 and 20 AAC 25.112. Alan Baldivieso, AEA geothermal program manager, has consulted with Patricia Bettis and Guy Schwartz at AOGCC to gather information and outline the steps required to plug and abandon all six wells. Alan has also contacted representatives of local landowners to confirm this is the preferred outcome. Based on these conversations and recommendations from AOGCC staff, AEA proposes to solicit bids through AEA's procurement process and select a contractor to perform the work; submit applications for sundry approval for the six wells to AOGCC; plug the wells according to the accepted plan with work estimated to be completed by September 30, 2015. I understand AOGCC staff has voiced support with the proposed course of action. Please let me know if you require additional information. Sii - rely, 0071/4-&._ Sa a isher-Goad Executive Director cc: Fred Parady, DCCED Acting Commissioner akpner 813 West Northern Lghts Boulevard Anchorage,Alaska 99503 T 907 771 300D Toll Free(Alaska Only;888 300 8534 F 907 771.3044 • ' ;?‘. Transmittal letter to be sent to: Chris Hladick, Commissioner Alaska Department of Commerce, Community, and Economic Development P.O. Box 110800 Juneau,AK 99811-0800 Wayne E.Westberg, President M-W Drilling, Inc. PO Box 110389 Anchorage,AK 99511 Cc: Alan P. Baldivieso,Geothermal Program Manager Alaska Energy Authority 813 West Northern Lights Blvd. Anchorage, AK 99503 Bettis, Patricia K (DOA) PSD /?7 9O From: Bettis, Patricia K (DOA) Sent: Monday, June 15, 2015 1:38 PM To: 'Alan P. Baldivieso' Cc: Guhl, Meredith D (DOA); Colombie, Jody J (DOA) Subject: Pilgrim Springs 1-5 and Mary's Igloo 1 Good afternoon Alan, The AOGCC has not received any sundry applications for the plugging and abandonment of the Pilgrim Springs 1-5 and Mary's Igloo 1 wells. Does AEA plan to submit those application in the near future? Thank you, Patricia Patricia Bettis Senior Petroleum Geologist w04E© '1i!�` 0 l�\`' Alaska Oil and Gas Conservation Commission �•W` 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE:This e-mail message, including any attachments,contains information from the Alaska Oil and Gas Conservation Commission (AOGCC),State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information.The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it,without first saving or forwarding it,and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at(907)793-1238 or patricia.bettis@alaska.gov. 1 Bettis, Patricia K (DOA) ?7=b From: Alan P. Baldivieso <ABaldivieso@aidea.org> Sent: Monday,June 15, 2015 1:57 PM To: Bettis, Patricia K (DOA) Cc: Guhl, Meredith D (DOA); Colombie,Jody J (DOA) Subject: RE: Pilgrim Springs 1-5 and Mary's Igloo 1 Hi Patricia, During our earlier conversations, Guy had indicated that the applications for sundry approvals should be submitted by the contractor selected to perform the work. I just spoke with the contractor—MW Drilling—who indicated that he intends to submit the applications later this week. I understand that Wayne Westberg from MW Drilling has been in touch with Guy to clarify expectations for the applications. Best, Alan Baldivieso Program Manager Alaska Energy Authority (907) 771-3027 SCOW J U N 2 h 201'5 From: Bettis, Patricia K(DOA) [mailto:patricia.bettis@alaska.gov] Sent: Monday,June 15, 2015 1:38 PM To:Alan P. Baldivieso Cc: Guhl, Meredith D (DOA); Colombie,Jody J (DOA) Subject: Pilgrim Springs 1-5 and Mary's Igloo 1 Good afternoon Alan, The AOGCC has not received any sundry applications for the plugging and abandonment of the Pilgrim Springs 1-5 and Mary's Igloo 1 wells. Does AEA plan to submit those application in the near future? Thank you, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE:This e-mail message, including any attachments,contains information from the Alaska Oil and Gas Conservation Commission (AOGCC),State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information.The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it,without first saving or forwarding it,and,so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at(907)793-1238 or patricia.bettis@alaska.gov. 1 17q- ORO 054(6.3 Guhl, Meredith D (DOA) From: Bettis, Patricia K(DOA) Sent: Tuesday, March 03, 2015 1:51 PM To: Guhl, Meredith D (DOA) Cc: Schwartz, Guy L (DOA) Subject: FW: ACEP Reconnaissance Trip Report Pilgrim Springs Geothermal Wells Dated 2010 Attachments: AppD_wellhead repairs.pdf Meredith, Per our discussion, please put a copy of the Wellhead Repair Report into Laserfiche Well History Folder for each of the following wells: Pilgrim Springs-1 (PTD 179-079) Pilgrim Springs-2 PTD 179-085 Pilgrim prmgs 3 (PTD 179-090) yip MAR 0 4 2015 Pilgrim Springs-4 (PTD 1�6-274) Pilgrim Springs-5 (PTD 100-275) Mary's Igloo-1 (PTD 100-276). Please also place a reference in RBDMS for each PTD that the report was received March 3, 2015. Thanks, Patricia From: Alan P. Baldivieso [mailto:ABaldivieso@aidea.orgl Sent: Tuesday, March 03, 2015 1:00 PM To: Bettis, Patricia K (DOA); Schwartz, Guy L (DOA) Subject: RE: ACEP Reconnaissance Trip Report Pilgrim Springs Geothermal Wells Dated 2010 Thank you, Patricia. I spoke with Chris and he sent the attached report detailing the repairs that the University had done to some of the wellheads. Based on the conversation I had with Guy this morning,the application for sundry approvals will need to include specifics from the contractor that is ultimately selected to perform the work. I have identified several contractors that are familiar with the Pilgrim Hot Springs wells, but will need to accept bids through our procurement process prior to awarding the contract. I anticipate that the earliest the work can begin will be in July,although the road to the site may be clear of snow earlier than usual this year. I will specify that the work be completed by Sept 30, 2015. Is this approach to plugging and abandoning the 6 wells acceptable? Thank you, Alan Baldivieso Program Manager Geothermal, Hydrokinetic, Emerging Energy Technologies 1 Alaska Energy Authority (907) 771-3027 From: Bettis, Patricia K(DOA) [mailto:patricia.bettis@alaska.gov] Sent:Tuesday, March 03, 2015 11:51 AM To:Schwartz, Guy L(DOA) Cc:Alan P. Baldivieso Subject:ACEP Reconnaissance Trip Report Pilgrim Springs Geothermal Wells Dated 2010 Guy and Alan, This report may be of use to you. UAF may have worked on some of the wells. Christopher Pike may be able to provide you with that information. His telephone number is(907) 272-1522; cell is(907)888-3850. Regards, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage,AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE:This e-mail message, including any attachments,contains information from the Alaska Oil and Gas Conservation Commission (AOGCC),State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information.The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it,without first saving or forwarding it,and,so that the AOGCC is aware of the mistake in sending it to you,contact Patricia Bettis at(907)793-1238 or patricia.bettis@alaska.gov. 2 Bettis, Patricia K (DOA) ?/--6 / ;� 9 - 090 From: Mattson, Linda J (CED) Sent: Wednesday, December 10, 2014 9:05 AM To: Bettis, Patricia K (DOA) Cc: Fishergoad, Sara L (AIDEA); Skaling, Sean M (AIDEA); Parady, Fred E (CED) Subject: Signed Letter from Acting Commissioner Fred Parady Attachments: 12.08.14 Patricia Bettis Pilgrim Springs Letter.pdf SCANNED DEC 16 2014 Good Morning Ms. Bettis, Attached you will find a copy of a letter regarding the Pilgrim Springs Geothermal Wells issue that has been signed by Acting Commissioner Fred Parady. The original is in the mail to you. Please feel free to contact us at 465-2500 if you have any further questions. Cordially, Linda Mattson Executive Secretary Office of the Commissioner Department of Commerce, Community and Economic Development THE STATE Department of Commerce, Community, and Economic Development o f ALAS_�A OFFICE OF THE COMMISSIONER GOVERNOR BILL WALKER P.O. Box 110800 Juneau. Alaska 99811 0800 Main: 907.465.2500 December 8, 2014 Ms. Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West Seventh Avenue Anchorage, AK 99501 Dear Ms. Bettis: Progrcirn,s tax: 901 465..5442 As you know from our conversation last week, DCCED has been working diligently to respond to your letter of September 12`h regarding the Pilgrim Springs Geothermal Wells issue, Docket No: OTH-14019. We have gathered substantial historical information and believe a proposed plan for the wells with the current project proponents is the solution although it remains unclear as to the specifics of DCCED's current responsibility and best path forward. Any action regarding the wells for which DCCED is listed as the operator appears to require coordination with the land owners Unataaq and Mary's Igloo Native Corporation. Regardless, pending completion of this research and sorting out these responsibilities, we would like to request a 60 day extension. We understand that ACEP has been or will be in contact with you regarding the four wells for which ACEP is the operator of record. Please feel free to contact me at any time regarding this matter. Sincerely, Fred Parady Acting Commissioner cc: Sara Fisher -Goad, Executive Director, Alaska Energy Authority Sean Skating, Program Development and Project Evaluation Director, Alaska Energy Authority Bettis, Patricia K (DOA) P/n, /fig- 0�o From: Sara Fisher -Goad <SFisherGoad@aidea.org> Sent: Thursday, December 04, 2014 4:48 PM To: Bettis, Patricia K (DOA) Cc: Parady, Fred E (CED); Bittner, Jon S (CED); Skaling, Sean M (AIDEA); Baldivieso, Alan P (AIDEA) Subject: RE: Pilgrim Springs Attachments: AOGCC-correspondence.pdf %ANNED DEC 10 2014 Patricia —I've attached some scanned correspondence relating to the Pilgrim Hot Springs wells listing Commerce as the operator. The 2009 AOGCC correspondence with AEA regarding the wells is attached. Also attached is a letter from AOGCC to BSNC regarding wells 197078 and 179085. Could you please confirm who AOGCC considers responsible for the 6 wells that have Commerce listed as the operator? I understand UAF and Unaatuq will be responding to AOGCC's September 12, 2014 letter and addressing the 4 wells listing UAF as the operator of record. Sara Sara Fisher -Goad Executive Director Alaska Energy Authority 907-771-3012 (Office) 907-301-0103 (Cell) From: Bettis, Patricia K (DOA) [mailto:patricia.bettis@alaska.gov] Sent: Wednesday, December 03, 2014 2:01 PM To: Sara Fisher -Goad Cc: Parady, Fred E (CED); Jon Bittner Subject: Pilgrim Springs Sara, The AOGCC records show the Division of Energy & Power as the operator of record for Pilgrim Springs -1, Pilgrim Springs - 2, Pilgrim Springs -3, Pilgrim Springs -4, Pilgrim Springs -5 and Mary's Igloo -1 geothermal wells. Hence, AOGCC's September 12, 2014 Pilgrim Springs Geothermal Wells letter was sent to the Alaska Department of Commerce, Community, and Economic Development. Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. ALASKA OIL ANIS GAS CONSERVATION COMMISSION November 18, 2009 CERTIFIED MAIL RETURN RECEIPT REQUESTED 7009 2250 0004 3911 4986 Irene Anderson Bering Straits Native Corporation PO Box 1008 �cn�iN�o 1 10 Front Street, Suite 300 Nome, Alaska 99762 SEAN PARNELL, GOVERNOR 333 W. 7th AVENUE, SUITE 100 ANCHORAGE, ALASKA 99501.3539 PHONE (907) 279-1433 FAX (907) 276-7542 Re: Wells Pilgrim Spring 1 (PTD 179078), Pilgrim Spring 2 (PTU 179085) Dear Ms. Anderson: In October, 1979 the Alaska Oil and Gas Conservation Commission (AOGCC or Commission) issued permits to drill the subject wells. The Commission is currently reviewing records forthe purpose of identifying Alaska wells that have not been properly plugged and abandoned, and which thus may constitute safety or environmental hazards. Our records reveal that the wells identified above require remedial action to bring them into com- pliance with current Commission regulations. This remedial work will include cementing the wells in accordance with 20 AAC 25, Article 2. AOGCC is contacting you to request assis- tance in identifying current property ownership so that the required action can be taken. The Commission is also sending copies of this correspondence to the Catholic Church Fairbanks Diocese, to the entity identified as Mary's Igloo, and to Mr. Steve Haagenson, Executive Director of the Alaska Energy Authority, to make them aware of the potential hazards presented by these wells. It is our intention to have the responsible well owner properly plug and abandon the wells. Should the owner fail to do so, then AOGCC intends to contract to plug and abandon the wells, reserving the right to hold responsible parties financially accountable for costs incurred. If you have questions regarding this finding, please contact Mr. Winton Aubert, Senior Engineer, at 907-793-1231 or winton.aubert@alaska.gov. Sincerely, Cathy P. erster Commiss oner cc: Catholic Church Fairbanks Diocese Steve Haagenson, SOA, Dept of Commerce 1E)Ek imcnl and Export Authority October 14, 2009 Ms. Cathy P. Foerster, Commissioner Alaska Oil and Gas Conservation Commission 333 W 7'h Avenue, Suite 100 Anchorage, AK 99501-3539 Re Status of Oil and Gas Wells Dear Ms Foerster ALASKA E _—)ENERGY AUTHORITY RECEIVED OCT 1 6 2009 Akda Di & %t Cons. Cotfmittion Af hmp I'm writing in response to your September 30, 2009, letter wherein you requested a letter to verify suspended, long-term shut-in and observation wells Subsequent to receiving the letter, AEA's Mike Harper conferred with Winton Aubert of your office. To the best of our knowledge, there has been no significant activity at Pilgrim Hot Springs since 1982 Our brief research shows that the only interest has been potential development of the geothermal hot springs in the area However, most significant is the ownership of this parcel containing the wells It is our understanding that Pilgrim Hot Springs is owned by the Catholic Church for surface estate while the local Native Corporation, Mary's Igloo, is subsurface owner If you desire further information about land issues you may wish to contact Irene Anderson of Bering Straits Native Corporation in Nome There has been talk of further research and exploration with the Mary's Igloo group possibly partnering with Alaska Center for Energy and Power at UAF. There is data that one can easily attain through the internet, but I have included two reports that will provide some background. If you desire further information please feel free to contact David Lockard, PE with our office at(907)771-3062. Sincerely, ALASKA ENERGY AUTHORITY vtl " - V--* - Steve Haagenson Executive Director Attachments: 1982 Stanford University Report AEA 2007 Feasibility Report cc Tab Ballantine, Department of Law Irene Anderson, Bering Straits Native Corporation Gwen Holdmann, Alaska Center for Energy and Power David Lockard, AEA 813 West Northern Lights Boulevard • Anchorage., Alaska 99503-2495 www.aidea.org • 907/771-3000 0 FAX 907/771-3044 • Toll Free (Alaska Only) 888/300-8534 • Nvww.akenergyauthority.org AL&SIKA 011L AND GAS CGUSERVAT101V COPOUSSiOW September 30, 2009 CERTIFIED MAIL RETURN RECEIPT REQUESTED 7005 1160 0001 5753 9158 \'1 mk — c.-,—( -,�— SEAN PARNELL, GOVERNOR 333 W. 7th AVENUE, SUITE 100 ANCHORAGE. ALASKA 995013539 PHONE (907) 279-1433 FAX (907)276-7542 Steve HagensonN AEA Executive Director 10 813 W. Northern Lights Blvd. Anchorage, AK 99503 Re: Failure to Respond to Request for Information (20 AAC 25.300) Status of Oil and Gas Wells Dear Mr. Hagenson: Under 20 AAC 25.300 you are required to provide information requested by the Alaska Oil and Gas Conservation Commission (Commission). On January 28, 2009 the Commission requested verification of suspended, long-term shut-in and observation wells. To date you have provided no response to the Commission. This correspondence constitutes the Commission's final request for you to verify the wells as suspended, long-term shut-in or observation wells. If the requested information has not been received by the Commission by the close of business on December 1, 2009, you will be considered in violation of 20 AAC 25.300 and the Commission will take such action as it deems appropriate including, but not limited to, initiation of a public hearing, initiation of an enforcement action, and imposition of penalties as authorized under AS 31.05.150. If you have any questions regarding this request, please contact Winton Aubert at 907.793.1231 or winton.aubertia alaska.gov.. Sincerely, Cathy P. oerster Commissioner Attachment cc: Tab Ballantine Department of Law ZA A �`! ± SARAH PAL1N, GOVERNOR m ALASKA OIL AND G&S % 333 W 7th AVENUE SUITE 100 CONSERVATION COAIIUSSION ( PHONE ANCHORAGE, 99501-3539 PHONE (907) 2791433 .January 28, 2009 FAX (907) 276-7542 CERTIFIED MAIL RETURN RECEIPT REQUESTED 7005 1820 0001 2499 6057 Steve Hagenson AEA Executive Director 813 W. Northern lights Anchorage AK 99503 s om Re: Notice of Revised Suspended Wells Regulations and Request for Verification of Suspended and Shut -In Well Information Dear Mr. Hagenson: Inclosed are the Alaska Oil and Gas Conservation Commission's revised regulations regarding suspended wells (i.e., 20 AAC 25.110). Also enclosed is a list of suspended and long-term shut-in wells operated by the Alaska Energy Authority or your predecessor, the Division of Energy and Power Development. For each list, please verify the information for each well and provide any corrections by April 1, 2009. Location inspections required under 20 AAC 25.110 should be coordinated with Jim Regg at 907-793-1236 or jim.regg@alaska.gov. If you have any questions regarding this notice, please contact Tom Maunder at 907-793- 1250 or tom.maunder@alaska.gov. Sincerely, Cathy . Foerster Commissioner Enclosures Bettis, Patricia K (DOA) -PT6 l6. / ? j- d(Tp From: Sara Fisher -Goad <SFisherGoad@aidea.org> Sent: Wednesday, December 03, 2014 2:12 PM To: Bettis, Patricia K (DOA) Cc: Parady, Fred E (CED); Bittner, Jon S (CED) Subject: RE: Pilgrim Springs SCANNED DEC 10 2014 Thank you. Although we have no one on staff who was here during that time, it does appear with some of the documents we uncovered that it was a division in Department of Commerce and not a part of AEA or old APA. Fred — regardless of that issue, we can still help get this issue addressed. Sara From: Bettis, Patricia K (DOA) [mailto:patricia.bettis@alaska.gov) Sent: Wednesday, December 03, 2014 2:01 PM To: Sara Fisher -Goad Cc: Parady, Fred E (CED); Jon Bittner Subject: Pilgrim Springs Sara, The AOGCC records show the Division of Energy & Power as the operator of record for Pilgrim Springs -1, Pilgrim Springs - 2, Pilgrim Springs -3, Pilgrim Springs -4, Pilgrim Springs -5 and Mary's Igloo -1 geothermal wells. Hence, AOGCC's September 12, 2014 Pilgrim Springs Geothermal Wells letter was sent to the Alaska Department of Commerce, Community, and Economic Development. Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE. -Th is e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. Bettis, Patricia K (DOA) ?T6 From: Bettis, Patricia K (DOA) Sent: Wednesday, December 03, 2014 2:01 PM To: Fishergoad, Sara L (AIDEA) Cc: Parady, Fred E (CED); Bittner, Jon S (CED) Subject: Pilgrim Springs Sa ra, The AOGCC records show the Division of Energy & Power as the operator of record for Pilgrim Springs -1, Pilgrim Springs - 2, Pilgrim Springs -3, Pilgrim Springs -4, Pilgrim Springs -5 and Mary's Igloo -1 geothermal wells. Hence, AOGCC's September 12, 2014 Pilgrim Springs Geothermal Wells letter was sent to the Alaska Department of Commerce, Community, and Economic Development. Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE. This e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. Bettis, Patricia K (DOA) Tl _, /?-? - og C7 From: Sara Fisher -Goad <SFisherGoad@aidea.org> Sent: Wednesday, December 03, 2014 11:41 AM To: Parady, Fred E (CED) Cc: Bettis, Patricia K (DOA); Bittner, Jon S (CED) Subject: RE: Pilgrim Springs Geothermal Wells SCANNED DEC 14 2014 I have our geothermal project manager looking into this and we have a call into Gwen at UAF. The years associated with the drilling from "Division of Energy and Power" is probably old AEA nea APA (Alaska Power Authority). This is an interesting puzzle and I was not aware of this deadline or requirement prior to your email earlier today. It will take us at least a day to close the loop with UAF and come up with a plan, we are researching our library on old documentation. I agree with you, we need to apply for an extension. Patricia — do you know why this was not sent to AEA directly? Do the original documents from 1979 and 1982 mention Alaska Power Authority (I think the name change to AEA happened in 1990)? Sara PS — congratulations on the Acting Commissioner assignment. Sara Fisher -Goad Executive Director Alaska Energy Authority 907-771-3012 (Office) 907-301-0103 (Cell) From: Parady, Fred E (CED) [mailto:fred.parady@alaska.gov] Sent: Wednesday, December 03, 2014 9:36 AM To: Sara Fisher -Goad Cc: Bettis, Patricia K (DOA); Jon Bittner Subject: FW: Pilgrim Springs Geothermal Wells Sara Attached is a copy of a letter we received regarding DCCED well closure obligations from the Pilgrim Springs Geothermal project from 1979-1982. The operator is listed as DCCED Division of Energy and Power. Did that migrate into AEA, and can you help me run this to ground? We need to come up with an abandonment plan or plan of suspension. We also likely need to apply for an extension. We are working against a 12/15/14 deadline. Thanks for your help. Fred From: Bettis, Patricia K (DOA) Sent: Wednesday, December 03, 2014 9:21 AM To: Parady, Fred E (CED) Cc: Schwartz, Guy L (DOA) Subject: Pilgrim Springs Geothermal Wells Good morning Acting Commissioner Parady, I checked the USPS certified return receipt (green card) and the Alaska Department of Commerce, Community, and Economic Development received the Pilgrim Springs Geothermal Wells letter dated September 12, 2014 on September 15, 2014. I attached the wellbore schematics for those wells operated by the Division of Energy & Power for which the AOGCC has a record. This includes Mary's Igloo -1, PS -3, PS -4 and PS -5. Please note that these are old wellbore schematics contained in a 1983 Woodward -Clyde Consultants report entitled "Geothermal Energy Development at Pilgrim Springs, Alaska, Phase 11: Results of Drilling, Testing and Resource Confirmation" and may not reflect the current conditions of the wells. If you have any further questions, please do not hesitate to call or e-mail me. Regards, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. Bettis, Patricia K (DOA) From: Parady, Fred E (CED) Sent: Wednesday, December 03, 2014 9:36 AM To: Fishergoad, Sara L (AIDEA) Cc: Bettis, Patricia K (DOA); Bittner, Jon S (CED) Subject: FW: Pilgrim Springs Geothermal Wells Attachments: MI-1.pdf, PS -3 Wellbore schematic.pdf; PS -4 Wellbore schematic.pdf; PS -5 Wellbore schematic.pdf; Pilgrim Springs Geothermal Wells.pdf SCANNED 0 E C 10 2014 Sara: Attached is a copy of a letter we received regarding DCCED well closure obligations from the Pilgrim Springs Geothermal project from 1979-1982. The operator is listed as DCCED Division of Energy and Power. Did that migrate into AEA, and can you help me run this to ground? We need to come up with an abandonment plan or plan of suspension. We also likely need to apply for an extension. We are working against a 12/15/14 deadline. Thanks for your help. Fred From: Bettis, Patricia K (DOA) Sent: Wednesday, December 03, 2014 9:21 AM To: Parady, Fred E (CED) Cc: Schwartz, Guy L (DOA) Subject: Pilgrim Springs Geothermal Wells Good morning Acting Commissioner Parady, I checked the USPS certified return receipt (green card) and the Alaska Department of Commerce, Community, and Economic Development received the Pilgrim Springs Geothermal Wells letter dated September 12, 2014 on September 15, 2014. I attached the wellbore schematics for those wells operated by the Division of Energy & Power for which the AOGCC has a record. This includes Mary's Igloo -1, PS -3, PS -4 and PS -5. Please note that these are old wellbore schematics contained in a 1983 Woodward -Clyde Consultants report entitled "Geothermal Energy Development at Pilgrim Springs, Alaska, Phase 11: Results of Drilling, Testing and Resource Confirmation" and may not reflect the current conditions of the wells. If you have any further questions, please do not hesitate to call or e-mail me. Regards, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. THE STATE °ALASK--A- (XVI-RNOR SEAN PARtiF.) I September 12. 2014 CERTIFIED MAIL - RETURN RECEIPT REQl1ESTI:D 7012 3050 0001 4812 6808 (Unaatuy) 7012 3050 0001 4812 6815 (DC.ED) 7012 3050 0001 4812 6822 (UAF) Matt Ganley, Resources ,and External Affairs Unaatuq, LLC c/o Bering Straits Native Corporation P.O. Box 1008 e. AK')< 7C.-2 Alaska Oil and Oras Conservation Commission MS. Susan K. Bell, Cnmmissioner Alaska Department of Commerce, Community, and Economic Developn, ent P.O. Box 110800 Juneau, AK 99811-0800 Gwen Holdmann, Director UAF Alaska Center for Energy & Power P.O. Box 755910 Fairbanks, AK 99775-5910 Re: Pilgrim Springs Geothermal Wells Docket No: 0TH -14-019 Dear Mr. Ganley, Ms. Bell and Ms. Holdmann: 333 west Severn, A--ruc Ancn01090. A105i.0 9950) 3572 907 e)2 s G�a� o� �C►�t. As operators or landowner of reccu-d, you are advised that the ten geothermal wells drilled in the area of Pilgrim Springs, Alaska (see attached list) must either be plugged and abandoned in compliance with 20 AAC 25.105 and 20 AAC 25.112 or suspended under 20 AAC 25.110. Alaska Oil and Gas Conservation AOGCC regulations can be found at the following internet address: http_:jjdo-a._laska:gQvjggcJReguiat;ionslRe dex.html. A Sundry application form (Form 10-403) for the submittal of a plan of abandonment or a plan of suspension for a well to the AOGCC can be found at: http//doa-alaska.gov/ogc/forms/forms.htmi. Please note that each application for Sundry Approval must include a well schematic diagram showing the well's current condition and a well schematic diagram showing proposed downhole well design changes to comply with applicable regulations for plug and abandonment or suspension. Pilgrim Springs Geothermal Wells September 12, 2014 Page 2 of 2 If the AOGCC does not receive an acceptable plan and schedule for all ten wells within ninety (90) days of receipt of this letter, the AOGCC will notice a public hearing to determine whether remedial action is necessary with regard to the wells and which entity will hear responsibility for compliance. The applicable University of Alaska, Fairbanks Alaska Center for Energy & Power's (IIAF) lease will be expiring soon relative to the PS# 12-1, PS 12-2, PS 12-3 and P5 13-1 wells. Under 20 AAC 25.105, all permitted wells on a property must be properly abandoned before expiration of the operator's rights. Upon expiration of the lease, if these wells are not plugged and abandoned to the satisfaction of the AOGCC, UAF's bond will be forfeited. Forfeiture of the bond will not relieve UAF of responsibility for plugging and abandoning of the wells under AS 31.05. If Unaatuq, I.LC desires to take over operatorship of these four wells, a Designation of Operator Form (Form 10 411) must be submitted to and approved by the AOGCC, as provided under 20 AAC 25.020 in addition to filing the bond required by 20 AAC 25.025. Please call Ms. Patricia Bettis at (907) 793-1238 if you have question concerning this matter. Sincerely, Cathy P Foerster Chair, Commissioner Attachment M Kit Duke, Associate Vice President University of Alaska Facilities and Land Management 1815 Bragaw St., Ste. 101 Anchorage, AK 99508 Larry Hartig, Commissioner Department of Environmental Conservation P.O. Box 111800 Juneau, AK 99811-1800 p � •" ? o �, � E3� � li PILGRIM SPRINGS GEOTHERMAL WELLS 'SOA, Department of Commerce and Economic Development, Division of Energy and Power Attachment 1 DATE TOTAL DEPTH WELL NAME PTD No. OPERATOR Of RECORD Location DRILLED (feet) STATUS Pilgrim Springs -1 179-078 SOA, Division of Energy & Power* 36, T4S, R31W, KRM 1979 150 Shut-in Pilgrim Springs -2 1/9-08S SOA, Division of Energy & Power* 03, TSS, R31W, KRM 1979 150 Shut -.n Pilgrim Springs -3 179 090 SOA, Division of Energy & Power* 03, TSS, R31W, KRM 1982 260 Shut-in Pilgrim Springs -4 100-274 SOA, Division of Energy & Power* 03, TSS, R31W, KRM 1982 881 Shut-in Pilgrim Springs -5 100-275 SOA, Division of Energy & Power* 03, TSS, R31W, KRM 1982 1001 Shut-in Mary's Igloo -1 100-276 SOA, Division of Energy & Power* 03, TSS, R31W, KRM 1982 307 Shut-in PS 12-1 212-077 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 201 Z 1000 Suspended PS 12-2 212-109 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 2012 1294 Suspended PS 12-3 212-126 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 20 2 1183 Suspended PS 13-1 213-102 UAF Alaska Center for Energy & Power 36, T4S, R3 W, KRM 2013 1036 Suspended 'SOA, Department of Commerce and Economic Development, Division of Energy and Power Attachment 1 2 -inch side ports with 2 -inch valves G.L. 17 ft ft Cement -- 56 ft — 167.5 ft _ T.D. drilled 260 ft 10 -inch blind flange 4--10-inch master gate valve I�eV: 16 -inch casing in 20 -inch auger hole 10 -inch casing in 14-% inch hole -- 6 -inch casing in 9-7!9 inch hole 3- X 5 -inch concentric reducer welded on 3 -inch pipe overlap 12 ft –c* -3 -inch slotted casing Total length 105 ft Project No. Pilgrim Springs 15267A CASING PROFILE OF WELL PS -3 Figure Woodward -Clyde Consul mts 6 10 -inch master valve_ 2 -inch outlets with valves G. L. i ee e 19 ft p v; 86.5 ft Cement 187.4 ft 5 ft drill pipe, 3 drill collars, 7-7/8 in, stabilizer, sub float & bit for total length of 70.2 ft of steel left in hole TD drilled 881 ft 10 -inch blind flange with 1 -inch nipple for flow 19 ft: 16 -inch casing in 20 -inch hole 86.52 ft: 10 -inch casing in 14-% inch hole io �s a" o --*—.187.42 ft:8-inch casing e in 9-718 inch hole 0 e Open hole 97/8 inch to 520 ft; 7-7/13 inch below Lost drill stem in open hole Project No. 15267A I Pilgrim Springs CASING PROFILE OF WELL PS -4 Figure Woodward -Clyde Conuftants 7 0 10 -inch blind flange 10 -inch master gate valve --z--- J G. L. 11 ft 42 ft Cement 178 ft 588 ft 981 ft T.D. drilled 1001 ft 2 -inch side ports with 2 -inch valves - 2 each Project No. 15267A Pilgrim Springs Figure CASING PROFILE OF WELL PS -5 8 Woodward -Clyde Consultants 0 4 16 -inch casing in °: �;� 20 -inch auger hole o Le Ob o1 4 10 -inch casing in do 14-% inch hole ca b 6 o66d .=3 8 -inch casing in 14-1/, inch hole Gb:O C du Oo° Gbe Q e °' •' Overlap 10 ft c be 6- X 7 -inch concentric e,e reducer 6 -inch casing in 7.716 inch hole i°� 20 ft cement at bottom of 6 -inch casing. 3- X 5 -inch concentric reducer o—"—� 441 ft: 3 -inch slotted casing Project No. 15267A Pilgrim Springs Figure CASING PROFILE OF WELL PS -5 8 Woodward -Clyde Consultants 10 -inch blind flange 10 -inch master gate valve G. L. 20 ft 80 ft Cement 151 ft - 232 ft -- T.D. 307 ft 11114;?; L 2 -inch side Ports with 2 -inch valves 20 ft: 16 -inch in 20 -inch hole 3 8 -inch in 1141% inch hole 6 -inch in 14-% inch hole 3 -inch slotted casing 84 ft Project No. 15267A Pilgrim Springs CASING PROFILE OF WELL MI -1 F igur WDodward-Ctyde Consultants 9 Bettis, Patricia K (DOA) ?—/� From: Bettis, Patricia K (DOA) Sent: Wednesday, December 03, 2014 9:21 AM To: Parady, Fred E (CED) Cc: Schwartz, Guy L (DOA) Subject: Pilgrim Springs Geothermal Wells Attachments: MI-1.pdf; PS -3 Wellbore schematic.pdf; PS -4 Wellbore schematic.pdf; PS -5 Wellbore schematic.pdf SCANNED DEC 10 2014 Good morning Acting Commissioner Parady, I checked the USPS certified return receipt (green card) and the Alaska Department of Commerce, Community, and Economic Development received the Pilgrim Springs Geothermal Wells letter dated September 12, 2014 on September 15, 2014. I attached the wellbore schematics for those wells operated by the Division of Energy & Power for which the AOGCC has a record. This includes Mary's Igloo -1, PS -3, PS -4 and PS -5. Please note that these are old wellbore schematics contained in a 1983 Woodward -Clyde Consultants report entitled "Geothermal Energy Development at Pilgrim Springs, Alaska, Phase II: Results of Drilling, Testing and Resource Confirmation" and may not reflect the current conditions of the wells. If you have any further questions, please do not hesitate to call or e-mail me. Regards, Patricia Patricia Bettis Senior Petroleum Geologist Alaska Oil and Gas Conservation Commission 333 West 7th Avenue Anchorage, AK 99501 Tel: (907) 793-1238 CONFIDENTIALITY NOTICE. This e-mail message, including any attachments, contains information from the Alaska Oil and Gas Conservation Commission (AOGCC), State of Alaska and is for the sole use of the intended recipient(s). It may contain confidential and/or privileged information. The unauthorized review, use or disclosure of such information may violate state or federal law. If you are an unintended recipient of this e-mail, please delete it, without first saving or forwarding it, and, so that the AOGCC is aware of the mistake in sending it to you, contact Patricia Bettis at (907) 793-1238 or patricia.bettis@alaska.gov. 2 -inch side ports with 2 -inch valves G. L. 17 ft f t Cement — 58 ft —167.5 ft T.D. drifted 260 ft 0 • 10 -inch blind flange 4104nch master gate valve 16 -inch casing in 20 -inch auger hole 10 -inch casing in 14A inch hole k. ts--- 6 -inch casing in 9-7/9 inch hole 3- X 5 -inch concentric reducer welded on 3 -inch pipe overlap 12 ft 3 -inch slotted casing Total length 105 ft Project No. I Pilgrim Springs — 15267A J CASING PROFILE OF WELL PS -3 Figure WoodMrard-Clyde Constdtatfds 6 • 10 -inch master valve 2 -inch outlets with valves G. L. ds= ti 19ft 4, 86.5 ft Cement 187.4 ft 5 ft drill pipe, 3 drill collars, 7-7/8 in, stabilizer, sub float & bit for total length of 70.2 ft of steel left in hole TD drilled 881 ft 4_. 10 -inch blind flange with 1 -inch nipple for flow 19 ft: 16 -inch casing in 20 -inch hole 86.52 ft: 10 -inch casing ` in 14-% inch hole •I tea^- 187,42 ft:8-inch casing oa in 9.7/8 inch hole ca .�_ Open hole 97/8 inch to 520 ft; 7-7/8 inch below Lost drill stem in open hole Project No. 15267A I Pilgrim Springs CASING PROFILE OF WELL PS4 Figure Woodww-d-Clyde Conu tants 7 10 10 -inch blind flange 10 -inch master gate valve ------ ce-•G.L. 11 ft 42 ft Cement 178 ft 588 ft 981 ft T.D. drilled 1001 ft • 2 -inch side ports with 2 -inch valves - 2 each o —c� 16 -inch casing in 20 -inch auger hole Se o� 61 4 10 -inch casing in 66 14-% inch hole ea C oG� D ,e C, 8 -inch casing in Go: a 14-3inch hole d or, 000 Gde Q .e °' •; Overlap 10 ft 6- X 7 -inch concentric e reducer 4 6 -inch casing in 7.7A3 inch hole iV 20 ft cement at bottom of 6 -inch casing. 3- X 5 -inch concentric reducer 441 ft: 3 -inch slotted casing Project No. 15267A Pilgrim Springs Fjgufe CASING PROFILE OF WELL PS -5 8 Woodward-C.fy'de Cornu tantst 10 -inch blind flange 10 -inch master gate valve G. L. Poll' o..•c N% 1 20 ft :oio l•�:p ✓.r• 0 .A,� 80 ft r Cement 151 ft 232 ft T.D. 307 ft I I I 1 6 -inch in 14-% inch hole 1111 3 -inch slotted casing 84 ft Project No. 15267A I Pilgrim Springs F igure CASING PROFILE OF WELL MI -1 Woodvward-Clyde ConsWtwft 9 2 -inch side ports with 2 -inch valves 20 ft: 16 -inch in ;'� : ��o• 20 -inch hole •' [GJ: •�ii� e Co t' i ►J ;� r 8 -inch in 143: inch hole I I I 1 6 -inch in 14-% inch hole 1111 3 -inch slotted casing 84 ft Project No. 15267A I Pilgrim Springs F igure CASING PROFILE OF WELL MI -1 Woodvward-Clyde ConsWtwft 9 THE STATE GOVERNOR SEAN PARNELL September 12, 2014 CERTIFIED MAIL - RETURN RECEIPT REQUESTED 7012 3050 00014812 6808 (Unaatuq) 7012 3050 00014812 6815 (DCED) 7012 3050 00014812 6822 (UAF) Matt Ganley, Resources and External Affairs Unaatuq, LLC c/o Bering Straits Native Corporation P.O. Box 1008 Nome, AK 99762 \-i Ot -,..40LCi.C.X Ms. Susan K. Bell, Commissioner Alaska Department of Commerce, Community, and Economic Development P.O. Box 110800 Juneau, AK 99811-0800 Gwen Holdmann, Director UAF Alaska Center for Energy & Power P.O. Box 755910 SN� Fairbanks, AK 99775-5910 Re: Pilgrim Springs Geothermal Wells Docket No: OTH-14-019 Dear Mr. Ganley, Ms. Bell and Ms. Holdmann: 333 West Seventh Avenue Anchorage, Alaska 99501-3572 Main: 907.279.1433 rax: 907.276.7542 As operators or landowner of record, you are advised that the ten geothermal wells drilled in the area of Pilgrim Springs, Alaska (see attached list) must either be plugged and abandoned in compliance with 20 AAC 25.105 and 20 AAC 25.112 or suspended under 20 AAC 25.110. Alaska Oil and Gas Conservation AOGCC regulations can be found at the following internet address: http://doa.alaskagov/ogc/Regulations/Reglndex.html. A Sundry application form (Form 10-403) for the submittal of a plan of abandonment or a plan of suspension for a well to the AOGCC can be found at: http//doa.alaska.gov/ogc/formslforms.html. Please note that each application for Sundry Approval must include a well schematic diagram showing the well's current condition and a well schematic diagram showing proposed downhole well design changes to comply with applicable regulations for plug and abandonment or suspension. Pilgrim Springs Geothermal Wells September 12, 2014 Page 2 of 2 If the AOGCC does not receive an acceptable plan and schedule for all ten wells within ninety (90) days of receipt of this letter, the AOGCC will notice a public hearing to determine whether remedial action is necessary with regard to the wells and which entity will bear responsibility for compliance. The applicable University of Alaska, Fairbanks Alaska Center for Energy & Power's (UAF) lease will be expiring soon relative to the PS# 12-1, PS 12-2, PS 12-3 and PS 13-1 wells. Under 20 AAC 25.105, all permitted wells on a property must be properly abandoned before expiration of the operator's rights. Upon expiration of the lease, if these wells are not plugged and abandoned to the satisfaction of the AOGCC, UAF's bond will be forfeited. Forfeiture of the bond will not relieve UAF of responsibility for plugging and abandoning of the wells under AS 31.05. If Unaatuq, LLC desires to take over operatorship of these four wells, a Designation of Operator Form (Form 10-411) must be submitted to and approved by the AOGCC, as provided under 20 AAC 25.020 in addition to filing the bond required by 20 AAC 25.025. Please call Ms. Patricia Bettis at (907) 793-1238 if you have question concerning this matter. Sincerely, �41 P Cathy P Foerster Chair, Commissioner Attachment cc: Kit Duke, Associate Vice President University of Alaska Facilities and Land Management 1815 Bragaw St., Ste. 101 Anchorage, AK 99508 Larry Hartig, Commissioner Department of Environmental Conservation P.O. Box 111800 Juneau, AK 99811-1800 PILGRIM SPRINGS GEOTHERMAL WELLS *SOA, Department of Commerce and Economic Development, Division of Energy and Power Attachment 1 DATE TOTAL DEPTH WELL NAME PTD No. OPERATOR OF RECORD Location STATUS DRILLED (feet) Pilgrim Springs -1 179-078 SOA, Division of Energy & Power* 36, T4S, R31W, KRM 1979 150 Shut-in Pilgrim Springs -2 179-085 SOA, Division of Energy & Power* 03, T5S, R31W, KRM 1979 150 Shut-in Pilgrim Springs -3 179-090 SOA, Division of Energy & Power* 03, T5S, R31W, KRM 1982 260 Shut-in Pilgrim Springs -4 100-274 SOA, Division of Energy & Power* 03, T5S, R31W, KRM 1982 881 Shut-in Pilgrim Springs -5 100-275 SOA, Division of Energy & Power* 03, T5S, R31W, KRM 1982 1001 Shut-in Mary's Igloo -1 100-276 SOA, Division of Energy & Power* 03, T5S, R31W, KRM 1982 307 Shut-in PS 12-1 212-077 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 2012 1000 Suspended PS 12-2 212-109 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 2012 1294 Suspended PS 12-3 212-126 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 2012 1183 Suspended PS 13-1 213-102 UAF Alaska Center for Energy & Power 36, T4S, R31W, KRM 2013 1036 Suspended *SOA, Department of Commerce and Economic Development, Division of Energy and Power Attachment 1 Aubert, Winton G (DOA) From: Gwen Holdmann [gwen.holdmann@alaska.edu] Sent: Thursday, August 19, 2010 10:50 PM To: Aubert, Winton G (DOA) Subject: Pilgrim Hot Springs Winton, Page 1 of 1 I would like to confirm that the work conducted through the Alaska Center for Energy and Power (University of Alaska Fairbanks) at Pilgrim Hot Springs is purely intended for research purposes. The purpose of our project, funded primarily through the Department of Energy, is to test the validity of an innovative geothermal exploration technique which involves an advanced airborne infrared survey. To verify this technique we will conduct ground truthing using more traditional geophysical and geologic techniques, as well as collection of new data from six existing wells which will all be used to develop a conceptual model of the site. Eventually, we plan to confirm this model through the drilling of two SOOft gradient holes and two 2500ft confirmation holes to identify the recharge point for the hot springs and measure total heat loss to the surface to correlate to our airborne infrared data. Please let me know if you need any additional information, I am happy to provide it. Gwen Gwen Holdmann, Director Alaska Center for Energy and Power University of Alaska Physical Address: 814 Alumni Drive Mailing Address: PO Box 755910 Fairbanks AK 99775-5910 Ce1L(907) 590-4577 www.uaf.edu/acep www.energy-alaska.com www . akenergynetwork. com ., 8/23/2010 Memorandum To: Well History Files 1790780, 1790850, 1790900, 1002740, 1002750, 1002760 State of Alaska Oil and Gas Conservation Commission August 4, 2010 Re: Pilgrim Spring Geothermal Drilling and Testing Program -Notes and Coordinates for Wells From: Steve Davies /~~ a~~>,`~~~t~ ~~ ~~~ ~'.'A ?OTC A total of six exploratory geotherma~we~ls have ~ieen dnllec~ at Pilgrim Springs, located about 60 miles north of Nome, Alaska. This area is governed by Conservation Order No. 159, issued September 12, 1979, which requires a permit to drill from the Commission for "all wells to be drilled or borings into the soil for any purpose and to any depth in Sections 29, 30, 31, and 32, T4S, R30W, KRM, Sections 35 and 36, T4S, R31 W, KRM, and Sections 2,3,and 4, TSS, R31 W, KRM..." Three of these wells, Pilgrim Spring 1, 2, and 3 received permits to drill during 1979 (Permit Nos. 1790780, 1790850, and 1790900). Commission well history files indicate that Pilgrim Spring 1 and 2 were drilled to approximately 150' measured depth and suspended on November 25 and 20, 1979, respectively. There are no records in the Commission's well history file 1790900 to indicate that Pilgrim Spring 3 was drilled. During the summer and fall of 1982, Woodward-Clyde Consultants (Woodward-Clyde), under contract to the Alaska Division of Energy and Power Development, conducted an intensive drilling and testing program at Pilgrim Springs.' The initial well drilled was Pilgrim Spring 3, which had been previously permitted by the Commission. This was followed by the drilling of three additional, unpermitted wells: Pilgrim Spring 4, Mary's Igloo 1, and Pilgrim Spring 5. The results of this program are summarized in Woodward-Clyde's 1983 report, a copy of which has been placed in well history file 1002740. In 2010, Peter Illig of the Alaska Center for Energy and Power at the University of Alaska, Fairbanks conducted a reconnaissance trip to the site to Pilgrim Springs to locate and determine the status of the existing geothermal wells.2 Descriptions and photos of each wellhead indicate that all six wells are shut- in rather than suspended, as indicated by artesian flow and mineralization. The exact location coordinates for these wells are problematic. Coordinates for Pilgrim Spring 1, 2, and 3 listed as footages from section lines on the permits to drill were converted to latitude/longitude using the Commission's RBDMS database. These coordinates are shown on the accompanying satellite photograph by small yellow squares (Figure 1). Latitude/longitude coordinates stored in the RBDMS ~ Woodward-Clyde Consultants, 1983, Phase II: Results of Drilling, Testing and Resource Confirmation, Geothermal Energy Development at Pilgrim Springs, Alaska, Contract 82-0782 with the Alaska Department of Commerce and Economic Development, 62 p. 2 Illig, Peter, 2010, 6-29-2010 Preliminary Reconnaissance Trip Report, Pilgrim Hot Springs Geothermal Exploration, Alaska Center for Energy and Power. • • Coordinates provided by Illig in UTM, meters, when converted to NAD 83 lattude/longitude using CorpsCon 6.0, plot at the locations indicated by yellow stars on Figure 1. Well locations spotted by Illig on an air photo that accompanies his 2010 reconnaissance trip report are more difficult to translate to the satellite photo. It appears as though Illig's photo is rotated about 20 degree clockwise from north and is also severly stretched along its north-south axis. A prolonged trial and error session was needed to squeeze and rotate this air photo to approximate a close match of the streams and lakes to the satellite photo. But the match is not perfect: lakes and stream meander loops do not match closely between the photos. The well locations from the best-match fit between the air and satellite photos are indicated by the red circles on Figure 1. Accompanying Woodward-Clyde's 1983 report on the results of drilling and testing is a site map that, when uniformly scaled, matches the satellite photo almost exactly. The locations for the Pilgrim Spring and Mary's Igloo wells are indicated on Figure 1 by small, blue circles. When uniformly scaled, the USGS topographic map of this area also nearly perfectly matches the satellite photo and Woodward- Clyde's map. This topographic map is the source for the yellow section lines depicted on Figure 1. Because of the nearly exact match between the map accompanying Woodward-Clyde's 1983 report, the USGS topographic map and the satellite photo, and because Woodward-Clyde field personnel spent weeks in the field (rather than the single day spent by Illig), it is judged that the most accurate locations for the Pilgrim Spring and Mary's Igloo wells are those mapped by Woodward-Clyde. Based on these locations and the section lines derived from the USGS topographic map overly, the best estimates for the well locations are presented in the table, below. Footages measured from section lines converted to latitude/longitude using RBDMS: RBDMS AD 27) Well X Y S-T-R-PM Latitude Lon itude Pilgrim Spring 1 825' FEL 110' FSL 36-04S-31W-K 65.0917760142764 -164.925283825097 Pilgrim Spring 2 2565' FEL 55' FNL 03-OSS-3IW-K 65.0913250627542 -164.926042200407 Pilgrim Spring 3 2770' FEL 220' FNL 03-OSS-3IW-K 65.0908741108309 -164.927370965319 Pilgrim Spring 4 2580' FEL 270' FNL 03-OSS-31 W-K 65.0907374577024 -164.926138003074 Pilgrim Spring 5 2595' FEL 790' FNL 03-OSS-3IW-K 65.0893162733042 -164.926231665414 Mary's Igloo 1 3295' FEL 220' FNL 03-OSS-3IW-K 65.0908741129814 -164.930776865159 RBDMS latitude/longitude values converted to NAD 83 using CorpsCon 6: RBDMS AD 27) NAD 83 Well Latitude Lon itude Latitude Lon itude Pilgrim Spring 1 65.0917760142764 -164.925283825097 65.091028837 -164.927929670 Pilgrim Spring 2 65.0913250627542 -164.926042200407 65.090577861 -164.928687996 Pilgrim Spring 3 65.0908741108309 -164.927370965319 65.090126874 -164.930016710 Pilgrim Spring 4 65.0907374577024 -164.926138003074 65.089990242 -164.928783737 Pilgrim S rin 5 65.0893162733042 -164.926231665414 65.088569025 -164.928877249 Mary's I loo 1 65.0908741129814 -164.930776865159 65.090126809 -164.933422601 Plotting the results on the same photo (as close as I could reproduce it), yields the following plot of the accuracy of the coordinate measurements and conversions. The accuracy of measured footages from the section lines appears to be within about 150'. The footages measured from the satellite photo will be used in RBDMS as the best estimate of n~t~; and bounds coordinates for these wells. ..mot c November 21, 1979 Pilgrim Division ~f En.ergy &~Power Development Permit N6. Sur. ~c(~ ~'S ~990'w of NE cr Sec 3, T5S, R31W, KR~. Bott~ho~ Lo~~ a~ve. Mr. Donald Markle Energy Project Manager State of Alaska Division of Energy & Power Development 338 Denali $~reet Anchorage, Alaska 99501 Dear Mr. Marklei Enclosed is the approved application for permit to drill the above reference~ well contingent upon completion of the follow- ing stipulations~ (1) completion of wells No. I and 2 by cement- ing casing to total depth of 150' or through the water producing interval with an adequate cement plug below and installation of a._.~alye or valves capable of shutting off all flow from the wells. (2) Verifiuation that all equipment, supplies and personnel are available on the location of well No. 3 to cement, case, control and/or plug the well to its total depth of 500' before cessation of work. A l ithologic log is required from this well. Many rivers in Alaska and their drainage systems have been classifiod as important for the spawning or migration of anadromous fish. Operations in ~_hese areas are subject to AS 16,50.870 and the regulations promulgated thereunder (Title Alaska Administrative Co~e). Prior to commencing operations you may be contacted by the Habitat Coordinator's office, Department of Fish and Game. Pollution of any waters of the State is prohibited by AS 46, Donald Markle Spring No. 3 -2- November 2 !, 1979 Chapter 3, &rticle ? and the regulations promulgated thereunder (Title i8, Alaska Administrative Code, Chapter ?0) and by the Federal Wa~er Pollution Control Act, as amended. Prior to commencing operations you may be contacted by a representative of the Department of Environmental Conservation. Pursuant to AS ~8.40, Local l~tre 0nder State Leases,- the~ Alaska Department of Labor is being notified of the issuance of this permit to drill. To aid us in scheduling field 'w~rk, we would .appreciate your notifying this office within 48 hours after the well is spudded. We would also like to be notified so that a representative of the commission may be present to. witness testing of blowout preventer equipment Before surface casing shoe is drilled. In the event of suspension or abandonment, please give this office adequate, advance notification so that we may have a witness present. Very truly yours, ~oyle H. aamil~o~oEa OF THE COMMISSION Chairman of Alaska Oil & Gas ~nservation Commission Enclosure cc= Department of Fish &~Game, Habitat Section w/o encl. Departmen~ of Environmental Conservation w/o/encl. Department of La~or~ S~pervisor, Labor Law Compliance Division w/o encl. Department of Natural ~esources, Division of Forest, Land and Water ~anagement w/o encl. (Attn~ Brent Petrie, Chief of Water Management} Form 10-401 REV. 9.1-78 ~ SUBMIT IN TRIPI · (Other instructiov reverse side) STATE OF ALASKA r,~ E C Ei V ~' D ALASKA OIL AND GAS CONSERVATION CO~,l~t.qf~ PERMIT TO DRILL OR DEEPEN la. TYPE OF WORK DRILL b. TYPE OF WELL OIL GAS WELL [~ WELL 2. NAME OF OPERATOR 1[ State of ~aska, A/as/~ Oil & Bas tons. {,ornmissior DEEPEN [~] AJlOhOm~! SINGLE MULTIPLE Div. of Energy & Power Developemen 3. ADDRESS OF OPERATOR 7th Floor MacKay Bid§.-338 Denali St., ^nch., ^K 99501 4. LOCATION OF WELL Atsurface Approx. 285' S & 2990' W. of the N.E. corner' sec. . . 3T5S R31W K.R.M At proposeu prom zone ° 13. DISTANCE IN MILES AND DIRECTION FROM NEAREST TOWN OR POST OFFICE* §0 miles north Nome, Alaska 14. BOND INFORMATION: 5. 6. LEASE DESIGNATION AND SERIAL NO. 7. IF INDIAN, ALLOTTEE OR TRIBE NAME 8. UNIT FARM OR LEASE NAME ,. Pilgrim ~R~G ~J. WELL NO. 10. FIELD AND POOL, OR WILDCAT 11.SEC., T., R., M., (BOTTOM HOLE OBJECTIVE) Sec 3 T5S R31W K.R.M. 12. TYPE Surety and/or No. 15. DISTANCE FROM PROPOSED * LOCATION TO NEAREST PROPERTY OR LEASE LINE, FT. (Also to nearest drig, unit, if any) 395' EWL 18. DISTANCE FROM PROPOSED LOCATION TO NEAREST WELL DRILLING, COMPLETED, OR APPLIED FOR, FT. N.E. 295' 21. ELEVATIONS (Show whether DF, RT, CR, etc.) 25 feet I 16. No. OF ACRES IN LEASE $20 19. PROPOSED DEPTH 500' Amount 17.NO,ACRES ASSIGNED TO THIS WELL 10 20. ROTARY OR CABLE TOOLS rotaFr 22. APPROX. DATE WORK WILL START 11-15-79 23. PROPOSED CASING AND CEMENTING PROGRAM SIZE OF HOLE SIZE OF CASING WEIGHT PER FOOT GRADE SETTING DEPTH Quantity of cement 9 a/8" 8 5/8" 24# 50 feet 600# 7 ~/8" 6 5/8" 17# 500 ~eet 42 baqs - 3780# see seperate enclosure for proceedure data. IN ABOVE SPACE DESCRIBE PROPOSED PROGRAM: If proposal is to deepen give data on present productive zone and proposed new productive zone. If proposal is to drill or deepen directionally, give pertinent data on subsurface locations and measured and true vertical depths. Give blowout preventer program. 24. I hereby certify ~at the Fore~oing~ig True and Correct (This space for State office use) SAMPLES AND CORE CHIPS REQUIRED [] YES [] NO DIRECTIONAL SURVEY REQUIRED [-]YES [] NO PERMIT NO 7 ~" ~ O MUD LOG [] YES CONDITIONS OF APPROVAL, IF ANY: 'I OTHER REQUIREMENTS: [] No' YES, SEE TRANSMITTAL ~R A.P.ITN'0TV~RI~KL~OD~ - -- APPROVAL DATE NO~.. ,r 21, 1979 APPROVED BY ~<~'~ TITLE~ Chairman v ~' ~ *See Instruction on Reverse ~ae DATE ,, 11/21/79. XPLORATION SUPPLY AND EQUIPMENT, INC. 1 6727 SEWARD HIGHWAY, ANCHORAGE, ALASKA 99502 O' PHONE 344-2589 State o~ Alaska Oil & Gas ~nservation Com~aission ~:~t to Drill o~ Deepen L Pilgrim Springs Hole No. 3 drilling proceedure= A Mayhew Model 1000 Drill will be used in the drilling of this hole, The rig will be elevated on timbers to allow for placement of an 8" valve on the casing, aamud return line and a 2~ pressure relief valve and discharge line. The preventor assembly will be flanged on above these lines. A 9 3/8' hole will be drilled to a depth of 50 feet using 12# per gallon Bentonite and Baroid mixture. 8 5/8' casing will be set and cemented to 50 feet usin~ a class 'A' cement and 2~ Bentomite with a 100# bag of Silica Flour for each 5 bags ~ment. After setting the valves and prevent~ the hole will be drilled o~n using a 7 3/8' bit £o 500 feet. Mud weights will be maintained at a minimum of ~#/a~d'the~'~ return will be m~ni~red continuously for temperature and gas content. Cold water will be available and pumped from a nearby lake as required to lower fluid temperatures. Upon completion of the drilling, 6 5/8" casing will be lowered to the bottom and cemented using a cement m~ure aasoutlined for the surface casing. In the event the hole does not permit setting of the 6 5/8" casing to total depth, it will be followed with 5 I/2" casing to the bottom and cemented in, On completion the 8" valve will be removed and a 6" valve will be flanged to the 5 1/2" or 6 5/8" casing. A cap will be welded on ~ an extention above this valve. The top cap will contain a 2" and 1" valve with locking devices. .f E~~ XPLORATION SUPPLY AND EQUIPMENT, INC. 672,7 SEWARD HIGHWAY, ANCHORAGE, ALASKA 9950Z PHONE 344-Z589 State of Alaska Oil & Gas,-Conservation Co~nlssion permit to Drill o~ Deepen Pilgrim SDrings Hole No. 3 drilling proceedurez A Mayhew Model 1000 Drill will be used in the drilling of this hole, The rig will be elevated on timbers to allow for placement of an 8" valve on the casing, ~mud return line and a 2~ pressure relief valve and discharge line. The preventor assembly will be flanged on above these lines. A 9 3/8' hol-e will be drilled to a depth of 50 feet using 12~ per gallon Bentonite and Baroid mixture. 8 5/8' casing will be set and cemented to 50 feet usinq a class iA* cement and 2% Bentomite with a 100~ bag of Silica Flour for each 5 bags cement. After setting the valves and prevent~ the hole will be drilled open using a 7 3/8" bit ~o 500 feet. Mud weights will be maintained at a minimum of 12# and the return will be monitored continuously for temperature and gas content. Col~ water will be available and pumped from a nearby lake as required to. lower fluid temperatures. Upon completion of the drilling, 6 5/8" casing will be lowered to the bottom and cemented using a cement mixture aasoutlined for the ~urface casing. In the event the hole does not permit setting of the 6 5/8" casing to total depth, it will be followed with 5 1/2" casing to the bottom and cemented in. On completion the 8" valve will be removed and a 6" valve will be flanged to the 5 1/2" or 6 5/8" casing. A cap will be welded on t~ an extention above this valve. The top cap will contain a 2" and 1" valve-with locking devices. · . % ,, /' . . . , : · ', I '3 o' 5; o e e locatecl in a -i~:'a 'reg~t~ ~y plat at~ch~- -' - . , . ~ . pr~ diS~ce' .~ ~~r~' l~e ............... . well l~t~ pro~ d~~m ~m O~ mils ' - · Is . ....... ............ ,. . Is ~fici~t ~e~ica~ aerie ava~le ~ ~is .~1 ....... - ..... .. ~il ~. ~ davit~ ' T= ' '- · Is ~a~r ~ o~7 aff~t~ ~ .. ................................ . ~ ~~t ~ appr~ ~f0re tin'ay ~it 10 Does operator '~have a boux~ in force ' · ' ' It Is a conservation order needed 12 IS administrative approval need~ ' · 'o % lee eeoeeeeeeeeeeeeeeeeeee eee eeeeee 13 IS conductor string Provided 14. Is enough cement used to circulate on conductor ar~ surface ......... 15. 16. 17. Will cement tie in surface and intezmedJ~te or production .strings ... Will cement cover all known productive horizons.. .................... · Will surface casing protect fresh ~ter zones ....................... 18. ;;ill all casing give adequate safety in collapse, .tension and kurst.. 19. Does BOPE have sufficient pressure rating- Test to / psig .. Additional Requirements: . : .. ._ / · (3): (5) BOPE I~f rev: 06/21/7 Appendix D Pilgrim Hot Springs Well Head Repairs 1 Pilgrim Hot Springs Geothermal Exploration Project Pilgrim Hot Springs Wellhead Repair Prepared by: Dan Brotherton, Arctic Drilling, Inc. & Markus Mager, ACEP Fairbanks Alaska, September 2010 Alaska Center for Energy and Power University of Alaska PO Box 755910 Fairbanks, AK 99775‐5910 2 Pilgrim Hot Springs Wellhead Repair Prepared by: Dan Brotherton, Arctic Drilling, Inc. & Markus Mager, ACEP Overview This task was completed in two phases, including: 1) an initial site visit in July 2010 to assess the condition of the six existing wells and develop a work plan for replacing the wellhead assemblies as needed, and 2) a second trip to the site to complete the work outlined in the work plan. This trip took place September 13th‐18th. The goal was to stop the wells from leaking, and make them accessible for instrumentation as part of the DOE funded project ‘Innovative Geothermal Exploration of Pilgrim Hot Springs, Alaska’. This report details the work performed on the individual wellheads during the September trip, which included replacing the gate valves on 4 of the 6 wells, including PS‐1, PS‐3, PS‐4 and MI‐1. At this time, none of the wells are leaking to the surface although there are still weak points which need to be addressed in the future. Recommendations for future work are outlined in this report. The team performing the work included Dan Brotherton from Arctic Drilling, Richard Eggert, and Max Iyapana from Bering Straits Development Company (BSDC), and Markus Mager from ACEP. For each of the four wellheads that were repaired, the team removed the existing gate valves by pumping down the water level in order to access the well and installing new, stainless steel valves. A detailed work description for each well can be found on the following pages. The team did not alter the configuration of the wellheads except for installing an additional fitting on top of the blind flanges capping the gate valves that can accept a 3” stainless standpipe with a tee and a valve to allow future installation of monitoring and logging equipment. A 1” access port with a plug was also built into the top of the blind flange. We recommend installing chains and locks on all the new valves and that all valves should be tested for functionality (opened/closed) at least once a year. Winterization of all the wells is necessary in order to prevent freezing and cracking of the gate valves. A plan for winterization has been forwarded in a separate communication that is attached to this report. Mobilization All new valves (6), parts, tools and supplies, totaling 3,842lbs, were purchased or rented by ACEP and shipped to Nome via Northern Air Cargo (NAC). Additional heavy equipment such as 4 wheelers, trailers, a bobcat and an air compressor were rented in Nome from BSDC. All parts, tools and equipment were transported to the side on September 13th and 14th and staged at the central staging area (Figure 1). Repair work began on the 15th, and was completed on the 18th. 3 Figure 1. Central staging area for repairs. PS‐4 (Completed September 14‐15th) PS‐4 supplies the water for the hot tub from a 2in lower valve. The well was leaking from a ½ inch hole in the blind flange on top of the 10in well gate valve and from the corroded 2in valves on each side of the 10in casing underneath the 10in valve (Figure 2). The lower bolt flange of the 10in valve was covered with mineral buildup and corrosion scale. There was a small pond around the well at the level of the 2in side valves from the constant leaking and overflow from the tub. The team laid down timbers and planks to create a stable work platform and removed mineral build up and rust scale from the lower bolt flange (Figure 3). After various failed attempts to release the old 10in valve from the well flange, the bolts had to be cut off with a torch (Figure 4 & 5). 4 Figure 2. Arrows show areas of leaking on PS‐4. Figure 3. Removing buildup and scale and attempting unsuccessfully to cut the flange bolts with a Sawzall. 5 Figure 4. Cutting bolts to remove old gate valve. Figure 5. Removing gate valve with Bobcat – note artesian flow from well. 6 PS‐4 has an inner 8in and an outer 10in casing. The outer casing is corroded and thin. The 8in/10in annulus (space between the two casings) continued to produce water after the water level inside the 8in casing was drawn down. This indicates a likelihood that they are set to different depths and water is produced from a different production zone in the annular space than through the main hole. In order to weld on new 2in nipples, this water would need to be drawn down. We were able to partly draw this water down with a 1in suction tube, but it was ultimately decided to not risk changing the 2in nipples after it was determined they are corroded but still sound (probably just as sound as the casing). Dan was not confident that the casing could be welded given its state of deterioration, so rather than risk creating a difficult to stop leak, the original nipples were left in place and only the 2in valves were replaced with new stainless 2” valves (Figure 6). Figure 6. New valves. The flange on this well is partly eaten away but still appears to be sound. The well is artesian and produces clear water. We installed a new 10in stainless steel valve with reducer flange on top connected to a 3in threaded nipple with a stainless cap. The well has no visible leaks and has been re‐connected to the hot tub via one of the new 2in valves. Further repairs on this wellhead will be needed in the near future. The 10in casing and the 2in nipples are thin and will eventually start leaking with no way to control or stop the flow. Dan recommends that the 8‐10in annulus be cemented from the bottom up to the top via tremie pipe which would seal off the corroded outer casing from the well water and would extend the life of the well. We are also recommending locks on the 2in valves to guarantee flow to the hot tub, prevent accidently closure (or opening) and to prevent well freeze up since this well will presumably not be shut in through the winter. If this is the case, it is imperative that the 2in valve remains open to prevent the new gate valve from freezing. 7 PS‐3 (Completed September 15‐16th) Prior to repairs, this well was leaking through the standpipe at the top of the well and later, after we started to remove buildup and scale (Figure 8), from a hole in the side of the 10in valve (Figure 7). We were unable to plug this leak so we dug a sump hole to drain the fluid and temporarily pump it away from the well and surrounding work space. Figure 7. Image showing leaks and corroded standpipe. 8 Figure 8. Removing scale and buildup. There was significant corrosion to several of the bolts connecting the existing gate valve to the wellhead flange, which necessitated cutting them off with a torch. We were able to drive out some of the bolts once they were cut, but several posed additional challenges and had to be removed in chunks. The torch was damaged during this process. Eventually we were able to remove the old 10in valve and replace it with the new stainless valve and bolts. The lower flange of the wellhead is severely corroded and the new flange bolts are exposed. The flange thickness is about half of original thickness and there is barely enough material left to secure new flange bolts (Figure 9). The well was completed with a new capped gate valve and blind flange, with a 3in nipple and cap. There is a 2in valve below the flange which was left in place as it is not currently leaking. Dan was not confident the well casing is sound enough to permit replacement of this valve. Figure 9. Exposed bolts, new valves. 9 PS‐3 is hotter than PS‐4 and produces clear water. There is also a 6in inner casing in this well that comes to the top of the 10in casing. Once the old valve was replaced, there were no visible leaks. Figure 10 shows a comparison of the old PS‐4 valve flange and the old PS‐3 valve flange. Figure 10. Old 10in valves from PS‐3 and PS‐4. Note severe corrosion on lower PS‐3 flange. Further repairs will be needed to this wellhead soon. Dan recommends cementing the 6‐10” annulus from the bottom up with tremie pipe so that the side valve can be removed and the main well flange can be replaced. This will protect the well from a permanent leak if one develops from the corroded casing. MI‐1 (Completed September 16‐18th) This well is located on adjacent Mary’s Igloo Native Corporation land. The top of the 10in gate valve was split in half, probably due to a freeze break. We were able to open and close the old gate valve but could not completely stop the flow of the well. MI‐1 is colder than PS‐4, and the water temperature of this artesian well appears to fluctuate. When flowed for a short period of time it produced gray, silty fluids. The well has no visible inner well casing. Due to leaks in the wellhead, a small pond had formed around the well several inches deep. We cleaned out an existing trench leading away from the well and the pond drained away to ground level. We built a work platform around the well and removed mineral build up, rust and scale from the bolts. Dan cut the bolts and drove them out with the torch. We removed and replaced the 10in valve with new stainless steel valve and bolts (Figure 11). The new gate valve is capped with a blind flange with 3in welded nipple and cap. 10 Figure 11. Work commences on MI‐1. Note artesian flow prior to pumping. Prior to repairs, the well was also leaking from several holes corroded through the casing below the gate valve flange. These leaks continued after installing, capping and shutting the new gate valve. The casing is paper thin midway between the flange and the cement. Dan welded a sleeve around the casing from about 2in above the cement level up to the flange, totaling about 14in. In order to weld on the sleeve, he completely removed the side valve, nipple and weldolet from the 10in casing. The sleeve stopped the leaks temporarily but the casing below the sleeve is thin and remains a significant weakness (Figure 12). Dan recommends installing a 6in inner casing and cementing the annulus from the bottom to the top via tremie in order to prevent further leaking once the casing corrodes further. Figure 12. Casing conditions of MI‐1. 11 PS‐1 (Completed September 18th) PS‐1 is the hottest of the repaired wells. This well was buried past the valve handle and covered with several inches of mineral buildup. Before repairs, it leaked out of a corroded two inch elbow from the top of the wellhead, as well as the remains of a 2in valve and a 1in hole in the top of the well cap (Figure 13). These holes were plugged with sticks driven into the openings after some of the mineral build up was removed. We then excavated around the well to just below the lower valve flange covering an 8ft by 10ft area, dug a sump hole for the water pump and laid down blocking and timbers for a work platform. We removed the mineral build up and de‐scaled what remained of the bolts (Figure 14). Figure 13. PS‐1 after excavation but before repair work. 12 Figure 14. Removing scale and buildup prior to replacing gate valve. When the gate valve was removed, it was evident that the lower flange was almost completed corroded away with no bolt heads remaining and the bolt threads visible from the side of the flange. We used the torch to remove the bolts, removed the old gate valve, cleaned up the flange as much as possible, and installed the new 6in stainless valve topped with a stainless blind flange, 3in nipple and cap (Figure 15). Figure 15. New valve installed on PS‐1. Note collapsed suction hose due to high temperatures. This well has a 4in inner casing inside the 6in outer casing, and does not have any lower casing 2in valves. There is not much left of the well flange, just barely enough to bolt on the new valve. The well is sealed and does not 13 leak at this time. We backfilled around the well but not to the previous level so it is possible to access valve handle. We left the remaining dirt piled to the side of the excavated area. Dan recommends installing a short (18in) spool section underneath the new gate valve to raise the valve above ground level and permit the well to be backfilled to ground level. This would also eliminate the standing water around the well, which is now below grade. He also recommends cementing the 4in‐6in annulus and welding on a new casing flange in order to prevent future leaks. PS‐2 This well is buried but inaccessible with rubber tired backhoe. We did not attempt to dig up this well. The wellhead valve is not corroded or leaking. We will attempt to make it accessible for instrumentation in 2011. Figure 16. PS‐2 buried but not leaking. We will need to excavate and replace valve before this well can be accessed with instruments. PS‐5 This well is also not corroded or leaking so we did not replace the valve at this time. We will attempt to make it accessible for instrumentation in 2011. 14 Figure 17. PS‐5 still appears to be in good shape, but not accessible by instrumentation. Winterization Plan for Wellheads (Dick Benoit and Gwen Holdmann) The trick to keeping a wellhead from freezing and then breaking during sub freezing weather is to inject a liquid that is both less dense than water and has a very low freezing point into the wellhead. This fluid needs to be environmentally benign so that when (not if) it is spilled or leaks out of the wellhead it does no environmental damage. Typically a food grade vegetable oil has been used in the lower 48. A small pump is used to pump the oil into the highest opening in the wellhead but if the pressures are very low even a hand operated pump may be enough to do the job. We expect this to be the case for the Pilgrim wells. This pump obviously needs to be able to overcome the internal wellhead pressure and can pump at low rates. You will need to know how much oil has been pumped into the wellhead. Enough oil needs to be pumped into the wellhead to push or displace the water down the well to a point below the freezing level, which is probably not more than a few feet. Therefore, it is necessary to calculate the volume of the wellhead above ground and a few feet of wellbore below ground. We expect this might amount of a few tens of gallons per well. It is important to check the wellhead for leaks, no matter how slow, before injecting the vegetable oil. If the oil leaks out of the wellhead then the water will flow back up in the wellhead and freeze. We recommend doing this on the 4 wells with new gate valves prior to hard freeze‐up.
